42 datasets found for "Use Support Rating"
-
Federal
Supporting Information for Per- and Polyfluoroalkyl Substances - Non-Targeted Analysis Interlaboratory Study Final Report
National Institute of Standards and Technology —
Supporting information for the NIST Internal Report entitled: Per- and Polyfluoroalkyl Substances - Non-Targeted Analysis Interlaboratory Study Final Report. The... -
Federal
Data to Support the Development of Rapid GC-MS Methods for Seized Drug Analysis
National Institute of Standards and Technology —
This dataset contains raw datafiles that support the development of rapid gas chromatography mass spectrometry (GC-MS) methods for seized drug analysis. Files are... -
Federal
Data Publication: Data from NIST IR "Report on VAMAS Round Robin of ISO 13067: Microbeam Analysis - Electron Backscatter Diffraction - Measurement of Average Grain Size"
Department of Commerce —
This data publication includes electron backscatter diffraction (EBSD) data used to support the development of ISO 13067 "Microbeam Analysis - Electron Backscatter... -
Federal
AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with bare plate single track and pad laser scans performed on the... -
Federal
Electromagnetic Interference Measurements from Tungsten Inert Gas (TIG) Arc Welding
Department of Commerce —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Data Set: Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations
National Institute of Standards and Technology —
This data set supports the technical paper and supporting information documents accepted to Steel Research International (https://doi.org/10.1002/srin.201800370). The... -
Federal
Data to Support the Development of Rapid GC-MS Methods for Seized Drug Analysis
Department of Commerce —
This dataset contains raw datafiles that support the development of rapid gas chromatography mass spectrometry (GC-MS) methods for seized drug analysis. Files are... -
Federal
Inventory of Community Resilience Indicators & Assessment Frameworks
Department of Commerce —
This dataset is an inventory of existing quantitative resilience frameworks, indicators, and measures that have been evaluated and entered into a database according... -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
Department of Commerce —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
NIST Micronutrients Measurement Quality Assurance Program Winter and Summer 2017 Comparability Studies
Department of Commerce —
The Micronutrients Measurement Quality Assurance Program (MMQAP) was coordinated by the Chemical Sciences Division and supported measurement technology for selected... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
High-Rate Volumetric Particle Tracking Microscopy (HR-VPTM) validation data
Department of Commerce —
To verify and validate the HR-VPTM technique, both synthetic images and gels with embedded particles undergoingcontrolled deformations were used to compared known and... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
Department of Commerce —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Supporting Information for Per- and Polyfluoroalkyl Substances - Non-Targeted Analysis Interlaboratory Study Final Report
Department of Commerce —
Supporting information for the NIST Internal Report entitled: Per- and Polyfluoroalkyl Substances - Non-Targeted Analysis Interlaboratory Study Final Report. The... -
Federal
Volume Fraction and Temperature Measurements of 30 cm Acetone, Ethanol, Methanol, Pool Fires
Department of Commerce —
This dataset documents a series of time-averaged gas species measurements made along the centerline of methanol, ethanol, and acetone pool fires steadily burning in a... -
Federal
NIST Micronutrients Measurement Quality Assurance Program Winter and Summer 2017 Comparability Studies
National Institute of Standards and Technology —
The Micronutrients Measurement Quality Assurance Program (MMQAP) was coordinated by the Chemical Sciences Division and supported measurement technology for selected... -
Federal
OpenFOAM simulations of stress mitigation strategies in embedded 3D bioprinting
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Embedded 3D printing is particularly useful for...
42 datasets found for "Use Support Rating"