34 datasets found for "Map Scan Images"
-
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Supporting Data for Selected Area Electron Beam Induced Deposition of Pt and W for EBSD Backgrounds
National Institute of Standards and Technology —
These are the unprocessed electron back scatter diffraction patterns (EBSPs) collected from the mesas of electron beam induced deposition (EBID) material, in addition... -
Federal
Characterization of zinc carboxylates in an oil paint test panel [dataset]
National Institute of Standards and Technology —
This dataset contains X-ray EDS (energy dispersive spectroscopy), FTIR (Fourier transform infrared spectroscopy), and DART-MS (Direct analysis in real time mass... -
Federal
SHREC'10 Track: Non-rigid 3D Shape Retrieval
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
FIB SEM image data set of Caenorhabditis elegans exposed to 60 nm Au nanoparticles
National Institute of Standards and Technology —
This folder contains image data sets from 14 separate serial sectioning sessions. The entire data folder consists of 1379 8 bit tif images and is 47.3 GB in size.... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Code for SerialTrack-XR particle tracking
National Institute of Standards and Technology —
This repository contains scripts for running a custom implementation of "SerialTrack" designed for 2D X-ray projection images taken during in situ micro-X-ray... -
Federal
Pharmaceutical polymorph identification and multicomponent particle mapping with non-negative matrix factorization
National Institute of Standards and Technology —
This data publication contains the code and demonstration data from a study using non-negative matrix factorization to learn, characterize, and chemically map crystal... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
A Data-Driven Approach to Complex Voxel Predictions in Grayscale Digital Light Processing Additive Manufacturing Using U-nets and Generative Adversarial Networks
National Institute of Standards and Technology —
Digital light processing (DLP) vat photopolymerization (VP) additive manufacturing (AM) uses patterned UV light to selectively cure a liquid photopolymer into a solid... -
Federal
SHREC'10 Track: Generic 3D Warehouse
National Institute of Standards and Technology —
The objective of this track is to evaluate the performance of 3D shape retrieval approaches on a Generic 3D shape benchmark based on the Google 3D Warehouse.... -
Federal
SHREC'09 track: querying with partial models
National Institute of Standards and Technology —
There are two objectives of this shape retrieval contest: a) To evaluate partial similarity between query and target objects and retrieve complete 3D models that are... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): 3D Scan Strategies
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing build performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on July... -
Federal
Effect of Heterogeneity and Shape on Optical Properties of Urban Dust Based on 3-Dimensional Modeling of Individual Particles
National Institute of Standards and Technology —
This project involves the analysis and modeling of individual urban atmospheric dust particles using scanning electron microscopy (SEM), energy dispersive x-ray...
34 datasets found for "Map Scan Images"