-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Ideal-Gas Thermodynamic Properties for Organic Compounds Containing Up to 7 C, O, or N Atoms
National Institute of Standards and Technology —
This data set contains enthalpies of formation, entropies, heat capacities, and thermal enthalpies for about 400 compounds available in the NIST TRC SOURCE database.... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Dynamic Polymer Annotated Library
National Institute of Standards and Technology —
Dynamic Polymer Annotated Library (DPAL)DPAL is an annotated library of peer-reviewed research that aims to: (1) Fill a knowledge gap in the materials science field... -
Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Data associated with "Characterizing the broadband RF permittivity of 3D-integrated layers in a glass wafer stack from 100 MHz to 30 GHz" for the 2024 International Microwave Symposium (IMS) in Washington, D.C.
National Institute of Standards and Technology —
We present a method for accurately determining the permittivity of dielectric materials in 3D integrated structures at broadband RF frequencies. With applications of... -
Federal
Data associated with "Primary quantum thermometry of mm-wave blackbody radiation via induced state transfer in Rydberg states of cold atoms"
National Institute of Standards and Technology —
Rydberg states of alkali atoms are highly sensitive to electromagnetic radiation in the GHz-to-THz regime because their transitions have large electric dipole... -
Federal
Validation Data and Control Software for ATIC: Automated Testbed for Interference Testing in Communication Systems
National Institute of Standards and Technology —
Validation data and software for the paper, "ATIC: Automated Testbed for Interference Testing in Communication Systems," to appear in Proceedings of 2023 IEEE... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
National Institute of Standards and Technology —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer... -
Federal
Theory aware Machine Learning (TaML)
National Institute of Standards and Technology —
A code repository and accompanying data for incorporating imperfect theory into machine learning for improved prediction and explainability. Specifically, it focuses... -
Federal
In-situ Raman spectra of indented fused silica
Department of Commerce —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Enhanced Gain Extrapolation
Department of Commerce —
We present an overview on a recently developedtechnique for performing antenna gain measurements with gainextrapolation that uses significantly fewer data points and... -
Federal
Smartphone Data for Development of Indoor Localization Apps
Department of Commerce —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
Ageing of High Strength p-Aramid Fibers Used in Body Armor
National Institute of Standards and Technology —
To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the...