78 datasets found for "HTML5休闲小游戏《切割大师》带广告接口✅项目合作 二开均可 TG：saolei44✅.lTimxIChDU"
-
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle
National Institute of Standards and Technology —
Data published in the paper "Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle". A controlled methane release... -
Federal
OpenFOAM simulations of filament fusion in embedded 3D printing
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. However, moving the nozzle near an existing... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Data associated with "Characterizing the broadband RF permittivity of 3D-integrated layers in a glass wafer stack from 100 MHz to 30 GHz" for the 2024 International Microwave Symposium (IMS) in Washington, D.C.
National Institute of Standards and Technology —
We present a method for accurately determining the permittivity of dielectric materials in 3D integrated structures at broadband RF frequencies. With applications of... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Phenylcyclohexane: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
"High dynamic range electro-optic dual-comb interrogation of optomechanical sensors" to be published in Optics Letters.
Department of Commerce —
"High dynamic range electro-optic dual-comb interrogation of optomechanical sensors" to be published in Optics Letters. -
Federal
NIST Fingerprint Image Quality (NFIQ) 2 Conformance Test Set
National Institute of Standards and Technology —
The images and values in this dataset are used to ensure conformance with ISO/IEC 29794-4, which may be purchased from https://www.iso.org/standard/62791.html. Values... -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
National Institute of Standards and Technology —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer... -
Federal
2,2'-Dimethylbiphenyl: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption Spectroscopy
National Institute of Standards and Technology —
Data set from peer-reviewed publication: A. J. Fleisher et al., Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption... -
Federal
Data for "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion"
National Institute of Standards and Technology —
Included here is relevant data to the publication "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion". Robotic antenna ranges are... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
Department of Commerce —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
AM Bench 2022 3D Build with Custom Laser Scan Strategies Modeling Challenge (AMB2022-02)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
Experimental Measurements for Pyrolysis Model Validation - Anaerobic Gasification of PMMA Under External Thermal Radiation
National Institute of Standards and Technology —
A set of 10 anaerobic gasification experiments was conducted on the poly(methyl methacrylate), PMMA, made available to participants in the MaCFP-2 Workshop. In each...
78 datasets found for "HTML5休闲小游戏《切割大师》带广告接口✅项目合作 二开均可 TG：saolei44✅.lTimxIChDU"