34 datasets found for "2025年6月短视频/短剧系统/带采集H5移动端在线影视视频短剧源码小剧场短剧影视源码✅项目合作 二开均可 TG：saolei44✅.FlLQBwZvfg"
-
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Uplink IQ Recordings
National Institute of Standards and Technology —
This data is provided as a supplement to NIST Technical Note 2159 Laboratory Method for Recording AWS-3 LTE Waveforms available at... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
2,2'-Dimethylbiphenyl: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Experimental Measurements for Pyrolysis Model Validation - Anaerobic Gasification of PMMA Under External Thermal Radiation
National Institute of Standards and Technology —
A set of 10 anaerobic gasification experiments was conducted on the poly(methyl methacrylate), PMMA, made available to participants in the MaCFP-2 Workshop. In each... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
ProSAS: An O-RAN Approach to Spectrum Sharing between NR and LTE
National Institute of Standards and Technology —
The dataset corresponds to the findings detailed in the paper titled "ProSAS: An O-RAN Approach to Spectrum Sharing between NR and LTE," to be included in the... -
Federal
AM Bench 2018 Residual Elastic Strain Measurements of 3D Additive Manufacturing Builds of IN625 Artifacts Using Neutron Diffraction and Synchrotron X-ray Diffraction
National Institute of Standards and Technology —
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to... -
Federal
Simulating Photon Echoes for Quantum Memory
Department of Commerce —
A Wolfram Demonstration Template has been specialized to a model of a semiclassical model of photon echoes. An incident Gaussian pulse propagates through a material... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05)
Department of Commerce —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
trans-1,2,3,4,4a,9,9a,10-Octahydroanthracene: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
Department of Commerce —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
Department of Commerce —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and...
34 datasets found for "2025年6月短视频/短剧系统/带采集H5移动端在线影视视频短剧源码小剧场短剧影视源码✅项目合作 二开均可 TG：saolei44✅.FlLQBwZvfg"