-
Federal
Data for "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion"
National Institute of Standards and Technology —
Included here is relevant data to the publication "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion". Robotic antenna ranges are... -
Federal
Microwave oven interference measurements at 2.4 GHz
Department of Commerce —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
Department of Commerce —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of... -
Federal
PSCR Usability Project_Voices of First Responders
Department of Commerce —
The Usability Team of the National Institute of Standards and Technology's (NIST) Public Safety Communications Research (PSCR) program works to identify issues faced... -
Federal
GAA-GAA Coexistence in the CBRS Band: Performance Evaluation of Approach 3
National Institute of Standards and Technology —
The General Authorized Access (GAA) users in the Citizens Broadband Radio Service (CBRS) band are the lowest priority users. They must cooperate with each other to... -
Federal
A Study of Timing Constraints and SAS Overload of SAS-CBSD Protocol in the CBRS Band
Department of Commerce —
This research work studied the effect of timing constraint and overloading of Spectrum Access System (SAS) on the SAS-CBSD protocol. Specifically, it studies how... -
Federal
3.5 GHz CBRS Federal Incumbent Protection Move Lists and Aggregate Interference Statistics
Department of Commerce —
Simulated Citizens Broadband Radio Service device deployments, calculated federal incumbent protection move lists, and calculated aggregate interference statistics.... -
Federal
High-SNR I/Q Recordings of FDD LTE User Equipment Emissions
Department of Commerce —
This dataset consists of high signal-to-noise ratio (SNR) in-phase and quadrature (I/Q) radio frequency (RF) recordings of long-term evolution (LTE) uplink emissions... -
Federal
Independent Calculation of Move Lists for Incumbent Protection in a Multi-SAS Shared Spectrum Environment
Department of Commerce —
In a shared spectrum environment, as is the case in the 3.5 GHz Citizens Broadband Radio Service (CBRS), the secondary users with lower priority are managed by... -
Federal
AWS-3 LTE Impacts on Aeronautical Mobile Telemetry
Department of Commerce —
This data is provided as a supplement to NIST Technical Note 2140, AWS-3 LTE Impacts on AMT, which presents test results assessing the impact of adjacent-band long... -
Federal
Grating Lobes and Spatial Aliasing in Sparse Array Beampatterns
National Institute of Standards and Technology —
Calculated beam pattern in Fourier space of a unitary input given two sparsely sampled synthetic aperture arrays: 1. a regularly spaced array sampled at 2*lambda,...- Matlab function
- Matlab script
- plain text
- Organized with x data given in the first column and, for line plots, y data given in subsequent columns or, for surface plots, y data given in the second column and z or color data given in the third column. Column headers define each axis with units reported as "_units".
- Organized with x data given in the first column and, for line plots, y data given in subsequent columns or, for surface plots, y data given in the second column and z or color data given in the third column. Column headers define each axis with units reported as "_units".
- Organized with x data given in the first column and, for line plots, y data given in subsequent columns or, for surface plots, y data given in the second column and z or color data given in the third column. Column headers define each axis with units reported as "_units".
-
Federal
High-SNR I/Q Recordings of FDD LTE User Equipment Emissions
National Institute of Standards and Technology —
This dataset consists of high signal-to-noise ratio (SNR) in-phase and quadrature (I/Q) radio frequency (RF) recordings of long-term evolution (LTE) uplink emissions... -
Federal
Data for "Targeted Chemical Pressure Yields Tunable Millimeter-Wave Dielectric "
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "Targeted Chemical Pressure Yields Tunable Millimeter-Wave 5G Dielectric with Unparalleled... -
Federal
C-V2X Interoperability Analyzer
Department of Commerce —
This software is a cellular vehicle-to-everything (C-V2X) interoperability analyzer tool developed at the National Institute of Standards and Technology (NIST)... -
Federal
Reference Measurements of Error Vector Magnitude
National Institute of Standards and Technology —
The experiment here was to demonstrate that we can reliably measure the Reference Waveforms designed in the IEEE P1765 proposed standard and calculate EVM along with... -
Federal
A Practical Approach to Placing Coastal Sensors for Spectrum Sharing in the 3.5 GHz Band
Department of Commerce —
This dataset contains the results of simulated deployments of Environmental Sensing Capability (ESC) sensors along the coasts of the contiguous United States in the... -
Federal
Optimal Transmit Volume Conditions for MCV QoE Measurement Systems Software
Department of Commerce —
Software to perform audio device characterization using transmit volume optimization (TVO) of push-to-talk communication devices performing Mission Critical Voice... -
Federal
Dataset for paper Y. Ma, S. Mosleh and J. Coder, "Analyzing 5G NR-U and WiGig Coexistence with Multiple-Beam Directional LBT," 2022 IEEE 19th Annual Consumer Communications & Networking Conference (CCNC), 2022, pp. 272-275, doi: 10.1109/CCNC49033.2022.9700690
Department of Commerce —
This project produces synthetic datasets of spectrum sharing simulation results (I/Q data, metadata, and KPIs). -
Federal
MCV QoE Mouth To Ear Latency Measurement Data
National Institute of Standards and Technology —
Mouth-to-ear (M2E) latency describes the time it takes speech input in a voice communication transmit device to be output from a receiving device, and has been... -
Federal
Model of the Wireless Factory Work-cell using the Systems Modeling Language
Department of Commerce —
Wireless technology is a key enabler of the vision of the future factory work-cell. Such work-cell will operate autonomously with a high degree of mobility enabled by...