LANDFIRE's (LF) 2022 Canopy Base Height (CBH) supplies information used in fire behavior models to determine the critical point at which a surface fire will transition to a crown fire in conjunction with other environmental factors, such as wind speed and moisture content. CBH data are continuous from 0 to 9.9 meters (to the nearest 0.1m) and describe the lowest point in a stand where there is enough available fuel (0.25in diameter) to propagate fire vertically through the canopy. Critical CBH is defined as the lowest point at which the Canopy Bulk Density (CBD) is .012kg m-3. Under different scenarios of disturbance and based on previous research incorporating plot-level CBH calculations, CBH for disturbed areas is determined via a set of linear equations relating Canopy Height (CH) and Canopy Cover (CC) to CBH. Linear equations for these calculations are derived from Forest Vegetation Simulator (FVS) scenario outputs. In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years.
To designate disturbed areas where CBH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php .