236 datasets found
-
Federal
TEAMER: MADWEC Techno-Economic Analysis
Department of Energy —
The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC),... -
Federal
TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials
Department of Energy —
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD)... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications... -
Federal
Experimental Performance of a Laboratory-Scaled Oscillating Surge Wave Energy Converter
Department of Energy —
This data is a subset of the data from an experimental campaign (https://mhkdr.openei.org/submissions/603) to characterize the hydrodynamics and performance of a... -
Federal
Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)
Department of Energy —
Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale... -
Federal
Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
Triton Point Absorber 1:30 Scale Tank Test Data for Extreme Wave Environments
Department of Energy —
This content model summarizes laboratory testing data for the Oscilla Power Triton WEC conducted at 1:30 scale. The WEC was tested in large operational waves and in... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry... -
Federal
TEAMER: Public Post Access Report Wavewatts Inc. Preliminary Performance Analysis for the Wavewatts Wave Energy Converter
Department of Energy —
Renewable energy costs have declined but are still unable to consistently meet power consumption demands when needed most. The Wavewatts concept is able to... -
Federal
Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter
Department of Energy —
Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were... -
Federal
Data from Numerical Modeling of Halona Oscillating Water Column Wave Energy Converter for Autonomous Underwater Vehicle Docking
Department of Energy —
In this project, we applied the Forchheimer flow model in Computational Fluid Dynamics (CFD) simulation to characterize the flow through an orifice used as a... -
Federal
TEAMER: Numerical Modeling of WECs to Support OES Task 10
Department of Energy —
This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions)... -
Federal
NREL MOIS Data for NWEI Azura August 2016
Department of Energy —
NREL Modular Ocean Instrumentation System (MOIS) data files for the Azura grid-connected deployment at the 30-meter berth of the US Navys Wave Energy Test Site (WETS... -
Federal
Techno-Economic Analysis of AquaHarmonics Wave Energy Converter Using SAM: Baseline and Optimized LCOE Estimates
Department of Energy —
This dataset presents techno-economic modeling results for the AquaHarmonics Wave Energy Converter (WEC), analyzing both baseline and optimized system configurations... -
Federal
NWEI Azura April 2016 Data
Department of Energy —
Data files for the NWEI Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base... -
Federal
Centipod WEC, Advanced Controls, WEC Geometry CAD
Department of Energy —
CAD files depicting the wetted geometry of the Centipod WEC used in numerical models during this project. This includes the wetted geometry of the point absorber body...
236 datasets found