-
Federal
MODFLOW-USG model used to evaluate water management issues in the Los Angeles Coastal Plain, California
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Water Replenishment District of Southern California, developed a regional groundwater model of the Los... -
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW 6 and MODPATH 7 model data sets used for the update of the groundwater-flow model for the Great Miami Buried Valley Aquifer in the vicinity of Wright-Patterson Air Force Base near Dayton, Ohio
Department of the Interior —
A previously constructed numerical model (https://pubs.usgs.gov/pp/2007/1737a/) simulating the regional groundwater-flow system in the vicinity of the Wright-... -
Federal
MODFLOW 6 models for simulating groundwater flow and a proposed remediation system in the sole-source aquifer system in southeastern Nassau County, New York
Department of the Interior —
This model archive contains files for a set of groundwater flow, particle tracking, and management optimization models that simulate the area around the Navy-... -
Federal
MODFLOW-NWT and MODPATH models, capture zones and uncertainty analysis for the Partridge River Basin, Minnesota
Department of the Interior —
A MODFLOW-NWT model was used to simulate the groundwater/surface-water interactions in the Partridge River Basin, MN using the Streamflow Routing and Unsaturated Zone... -
Federal
MODFLOW 6 Model Used to Simulate Groundwater Flow in the Long Island, New York Regional Aquifer System for 1900–2019 Pumping and Recharge Conditions
Department of the Interior —
This groundwater model archive documents a transient, regional-scale numerical model of the Long Island aquifer system that simulates hydrologic conditions for the... -
Federal
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data used to simulate groundwater flow and tritium transport from the HANDLEY underground nuclear test, Pahute Mesa, southern Nevada
Department of the Interior —
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and... -
Federal
MODFLOW-2005 and MODPATH models in support of groundwater flow model investigation of water resources at Chaco Culture National Historical Park
Department of the Interior —
Situated in a remote corner of northwestern New Mexico, Chaco Culture National Historical Park (CCNHP) was once the center of a sophisticated social, political and... -
Federal
Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis
Department of Energy —
Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a... -
Federal
GFLOW model files used to generate probabilistic waste-water plume extents and contributing areas to supply wells for a proposed waste-water infiltration lagoon scenario, Lac du Flambeau, Wisconsin.
Department of the Interior —
This data release contains files for three scenarios of an analytic element (GFLOW) groundwater flow model with particle-tracking that were developed in cooperation... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in reaches 3 and 4 of the Washita River aquifer, southern Oklahoma, 1980–2017
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Oklahoma Water Resources Board (OWRB), constructed a finite-difference numerical groundwater-flow model of... -
Federal
MODFLOW-NWT groundwater model used for simulating a potential future pumping scenario and forecasting associated groundwater-level changes in the Hualapai Valley, Northwestern Arizona
Department of the Interior —
A numerical groundwater flow model of the Hualapai Valley Basin, using MODFLOW-NWT, was developed to assist water-resource managers in understanding the potential... -
Federal
Model Archive for an Impulse Response Emulator of Groundwater Contaminant Transport Models
Department of the Interior —
This archive contains the code and other files to demonstrate the creation and application of an impulse-response emulator for process-based groundwater flow and... -
Federal
Evaluating Seawater Intrusion Forecast Uncertainty under Climate Change in Pajaro Valley, California: Model Archive
Department of the Interior —
Climate change and climate variability impacts such as rising sea levels have the potential to exacerbate seawater intrusion and the strain on coastal freshwater... -
Federal
MODFLOW-NWT model of groundwater flow in the Ozark Plateaus aquifer system, version 1.1
Department of the Interior —
A previously developed groundwater flow model (https://doi.org/10.3133/sir20185035) was modified and used as the primary tool to assess groundwater availability in... -
Federal
Cache Historical Calibration Period Groundwater-Flow Model
Department of the Interior —
The Mississippi Alluvial Plain (MAP) is one of the most important agricultural regions in the United States and underlies about 32,000 square miles of Missouri,... -
Federal
MODFLOW-2005 Models for Revisiting "An Exercise in Groundwater Model Calibration and Prediction"
Department of the Interior —
Hypothetical two-dimensional, steady-state groundwater flow models of a previously published 1988 model calibration exercise were developed using the finite-... -
Federal
Data from: "Genome report - chromosome-scale genome assembly of the Olive fly Bactrocera oleae (Diptera-Tephritidae)"
Department of Agriculture —
The olive fruit fly, Bactrocera oleae (Rossi) (Diptera: Tephritidae), is a specialist of fruits of the genus Olea and is a major pest of commercial olives due to... -
Federal
MODFLOW-NWT groundwater flow model and GWM-VI optimization code for the Little Plover River Basin in Wisconsin's Central Sand Plain
Department of the Interior —
The Little Plover River groundwater flow model simulates three-dimensional groundwater movement in and around Wisconsin’s Little Plover River basin under steady-state... -
Federal
MODFLOW-NWT groundwater model demonstrating groundwater model calibration with repeat microgravity measurements
Department of the Interior —
A numerical model was developed using MODFLOW-NWT and FloPy to simulate groundwater flow and demonstrate a practical method for incorporating repeat microgravity...