-
Federal
MODFLOW 6 models for simulating groundwater flow and a proposed remediation system in the sole-source aquifer system in southeastern Nassau County, New York
Department of the Interior —
This model archive contains files for a set of groundwater flow, particle tracking, and management optimization models that simulate the area around the Navy-... -
Federal
MODFLOW6 groundwater flow model, MODPATH particle-tracking simulation, and groundwater-transported nitrogen load model of average monthly conditions in coastal Connecticut and adjacent areas of New York and Rhode Island, 1993-2022
Department of the Interior —
A groundwater flow model simulating average monthly conditions, using MODFLOW6, was developed to better understand groundwater flow and groundwater-transported... -
Federal
MODFLOW 6 models for simulating groundwater flow in the Mississippi Embayment with a focus on the Mississippi Delta
Department of the Interior —
This model archive contains the model files for the MERAS 3 and Mississippi Delta groundwater flow models documented in the U.S. Geological Survey Scientific... -
Federal
Two 2-Dimensional models patterned after the Barends analytical solution for verifying the accuracy of the new Groundwater Energy (GWE) Transport model built for the MODFLOW 6 hydrologic simulator
Department of the Interior —
This data release contains two MODFLOW 6 simulations. Each simulation contains one groundwater flow (GWF) model and one groundwater energy (heat) (GWE) transport... -
Federal
MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam
Department of the Interior —
A proof-of-concept MODFLOW 6 groundwater model was developed to represent the bedrock, delta, and alluvially-deposited aquifers underlying the Mekong River Basin... -
Federal
MODFLOW 6 model scenario used to simulate transient stresses, heads, and flows in the Regional Aquifer System of Long Island, New York, 2005-2019
Department of the Interior —
This data release contains the input, output, and model code used to run a transient simulation of a previously published (Walter and others, 2020) steady-state... -
Federal
MODFLOW 6 model and ensemble used in the simulation of groundwater flow and land subsidence in the northern part of the Gulf Coast aquifer, 1897-2018 (ver. 2.0, September 2023)
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Harris-Galveston Subsidence District and Fort Bend Subsidence District, constructed a finite-difference... -
Federal
Groundwater flow and SNTEMP stream temperature historical model (2019-2023)
Department of the Interior —
A historical conditions MODFLOW6 and SNTEMP model was developed to simulate groundwater flows and instream temperatures in Beaver Creek, Alaska during the study... -
Federal
Groundwater flow and SNTEMP stream temperature model future scenarios (2019-2050)
Department of the Interior —
Future conditions model scenarios for MODFLOW6 and SNTEMP models were developed to simulate groundwater flows and instream temperatures in Beaver Creek, Alaska from... -
Federal
Soil water balance, groundwater flow, and stream temperature models for Beaver Creek, Alaska, 2019 to 2050
Department of the Interior —
A combined soil water balance, groundwater flow and stream temperature model was developed to simulate stream temperature under historical and future conditions.... -
Federal
Source code for Beaver Creek model archive
Department of the Interior —
This child item contains the source code for the soil water balance, MODFLOW6, and SNTEMP, PEST++, and python model codes used to run the models in the "Soil water... -
Federal
Groundwater flow and SNTEMP stream temperature model build and history matching workflows
Department of the Interior —
MODFLOW6 and SNTEMP models were developed to simulate groundwater flows and instream temperatures in Beaver Creek, Alaska from 2019-2023 using python scripts to... -
Federal
MODFLOW 6 Model Used to Simulate Groundwater Flow in the Long Island, New York Regional Aquifer System for 1900–2019 Pumping and Recharge Conditions
Department of the Interior —
This groundwater model archive documents a transient, regional-scale numerical model of the Long Island aquifer system that simulates hydrologic conditions for the... -
Federal
Groundwater Model Archive and Workflow for Neversink/Rondout Basin, New York, Source Water Delineation
Department of the Interior —
This model archive contains model files and a complete repeatable workflow for source water delineation for groundwater supply wells in the Neversink/Rondout Basins... -
Federal
MODFLOW 6 and MODPATH7 used to simulate regional groundwater flow and advective transport of per- and polyfluoroalkyl substances, Joint Base McGuire-Dix-Lakehurst and vicinity, New Jersey, 2018
Department of the Interior —
A three-dimensional groundwater flow model using MODFLOW 6 (version 6.2.2) was developed and calibrated for unconsolidated Coastal Plain aquifers underlying the Joint... -
Federal
MODFLOW 6 Groundwater Flow Model for the Des Moines River Alluvial Aquifer near Des Moines, Iowa
Department of the Interior —
Des Moines Water Works (DMWW) is a regional municipal water utility that supplies residential and commercial water resources to about 600,000 customers in Des Moines,... -
Federal
MODFLOW 6 models used to evaluate the accuracy of enhanced cell connectivity for simulation of flow through dipping aquifers
Department of the Interior —
This data release contains the MODFLOW 6 models described in the related Groundwater journal article (https://doi.org/10.1111/gwat.13459). The models are generalized...