-
Federal
Evaluation Data of a High Temperature COTS (Commercial Off-the-Shelf) Flash Memory Module (TI SM28VLT32) for Use in Geothermal Electronics Packages
Department of Energy —
The accompanying raw data is composslection. Each file is 3 columns and tab-delimited with the first column being the data address, the second column being the first... -
Federal
Utah FORGE: Triaxial Direct Shear Results - February 2025
Department of Energy —
This dataset contains results from nine triaxial direct shear tests conducted by Los Alamos National Laboratory on samples from FORGE Well 16A(78)-32. The primary... -
Federal
Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup
Department of Energy —
Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore... -
Federal
HT Flash and Tantalum Capacitor Report
Department of Energy —
Pushing the boundaries with geothermal tool development can often necessitate exceeding manufacturer specifications for temperature and pressure of individual circuit... -
Federal
Stability of Elastomers Subjected to Geothermal Well-Like Conditions
Department of Energy —
The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community... -
Federal
Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells
Department of Energy —
Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally... -
Federal
Testing for Controlled Rapid Pressurization
Department of Energy —
Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep... -
Federal
Reactive Transport Simulations of High-Tempertature Geologic Thermal Energy Storage (GeoTES) in Deep Saline Formations - I/O Files
Department of Energy —
Simulation input and output files, post-processed figures and excel tables, and tecplot layout files for generating figures. These simulations were run with... -
Federal
Application of Neutron Imaging to Investigate Flow through Fractures for EGS
Department of Energy —
There is an ongoing effort at Oak Ridge National Laboratory to develop a unique experimental capability for investigating flow through porous and fractured media... -
Federal
Preliminary performance of HT Datalink
Department of Energy —
Preliminary performance of high-temperature (HT) high-speed (HS) data link at room temperature over 5000 ft of wireline. The data shows ability of the data link to... -
Federal
High Temperature Evaluation of Tantalum Capacitors - Test 1
Department of Energy —
Tantalum capacitors can provide much higher capacitance at high-temperatures than the ceramic capacitors. This study evaluates selected tantalum capacitors at high... -
Federal
Pressure Sensor and Telemetry Methods for Measurement while Drilling in Geothermal Wells
Department of Energy —
Project status report as of end of 2011. Key milestones and accomplishments in the year 2011 include: Proof of feasibility of analog and digital components with their... -
Federal
Development of a Neutron Diffraction Based Experimental Capability for Investigating Hydraulic Fractures for EGS-like Conditions
Department of Energy —
Understanding the relationship between stress state, strain state and fracture initiation and propagation is critical to the improvement of fracture simulation... -
Federal
A Dynamic Plasticity Model for Rapidly-Heated 1045 Steel up to 1000 °C
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curves and initial temperatures) for compression experiments performed on annealed 1045... -
Federal
Ionic Fluids for EGS: Thermogravimetric Analysis of Ionic Liquids
Department of Energy —
This dataset contains non-isothermal thermogravimetric analysis (TGA) results for ten ionic liquids. The tests were performed using a TGA 5500 system under an air... -
Federal
Utah FORGE: Core Material Friction Experiments
Department of Energy —
The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 - 8533ft. The experiment conditions range from 100% relative... -
Federal
Utah FORGE 1-2409: PetroQuip Final Report for Zonal Isolation Solution for Geothermal Wells
Department of Energy —
This dataset contains the final technical report for the project Zonal Isolation Solution for Geothermal Wells, carried out from 2021 to 2024 by PetroQuip and the... -
Federal
High-Temperature Self-Healing Geothermal Cement Composites
Department of Energy —
A presentation with notes showing an overview of the last 6 months of the project on high-temperature self-healing inorganic cement composites. General approach, test...