-
Federal
Beach Profile Data Collected from Madeira Beach, Florida (November 6, 2020)
Department of the Interior —
This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides beach profile data collected at... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on August 05, 2021, from Juno Beach, Florida
Department of the Interior —
On August 05, 2021, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Juno Beach, Florida. This dataset, Juno_20210805.zip, was collected... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on June 22, 2022, from South Hutchinson Beach, Florida
Department of the Interior —
On June 22, 2022, surveys were conducted on ‘high-density’ sea turtle nesting areas located on South Hutchinson Beach, Florida. This dataset,... -
Federal
High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016
Department of the Interior —
Mount Adams, also known by the Native American names "Klickitat" or "Pahto", is a 3,742 meter-tall (12,278 feet) stratovolcano located 53 km (33 miles) north of the... -
Federal
Digital elevation models of upper North Fork Toutle River near Mount St. Helens, based on 2006-2014 airborne lidar surveys
Department of the Interior —
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on June 26, 2020, from Melbourne Beach, Florida
Department of the Interior —
On June 26, 2020, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Melbourne Beach, Florida. This dataset, Melbourne_20200626.zip, was... -
2020 LiDAR - Classified LAS
District of Columbia —
These lidar data are processed classified LAS 1.4 files at USGS QL2 covering the District of Columbia. Voids exist in the data due to data redaction conducted under... -
Federal
GNSS Topography Survey Data Collected from Tres Palmas, Rincón, Puerto Rico
Department of the Interior —
This data release presents the post-processed Global Navigation Satellite System (GNSS) ground-survey data acquired during the installation of a camera system at Tres... -
2015 LiDAR – Bare Earth
District of Columbia —
Bare Earth Light Detection and Ranging (LIDAR) Data - 2 foot resolution. The dataset contains locations and attributes of bare earth elevations in meters. Bare earth... -
State
CT Buildings
State of Connecticut —
Dataset Description: The CT Statewide GIS Services Lidar project required the planning, acquisition, processing, and creation of derivative products from lidar data... -
State
RiverCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
Federal
Beach Profile Data Collected from Madeira Beach, Florida (August 26, 2021)
Department of the Interior —
This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides beach profile data collected at... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on June 27, 2019, from Jensen Beach, Florida
Department of the Interior —
On June 27, 2019, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Jensen Beach, Florida. This dataset, Jensen_20190627.zip, was collected... -
Federal
August, 2022, airborne lidar survey of Mount St. Helens crater, upper North Fork Toutle River, and South Fork Toutle River
Department of the Interior —
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava... -
Federal
High-resolution digital elevation model of Mount St. Helens and upper North Fork Toutle River basin, based on airborne lidar surveys of July-September, 2017
Department of the Interior —
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava... -
State
2D Building Footprints
State of Connecticut —
Connecticut Statewide Building footprints were created during the CT Statewide GIS Services lidar project. Building footprints are reviewed against lidar intensity... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on July 22, 2022, from Juno Beach, Florida
Department of the Interior —
On July 22, 2022, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Juno Beach, Florida. This dataset, Juno_20220722.zip, was collected and... -
Federal
Repeat Lidar and Orthoimagery of Headwater Streams in the Donner und Blitzen River Basin, Oregon: Lidar Intensity Rasters, June 2022
Department of the Interior —
In June and September, 2022, NV5 Geospatial collected aerial imagery and near-infrared (NIR) light detecting and ranging (lidar) data from crewed aircraft over 62... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on September 08, 2021, from Melbourne Beach, Florida
Department of the Interior —
On September 08, 2021, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Melbourne Beach, Florida. This dataset, Melbourne_20210908.zip,... -
State
NVCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All...