27 datasets found
-
Federal
Airfoil Computational Fluid Dynamics - 9k shapes, 2 AoA's
Department of Energy —
This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and... -
Federal
Airfoil Computational Fluid Dynamics - 2k shapes, 25 AoA's, 3 Re numbers
Department of Energy —
This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and... -
Federal
TEAMER: Mass of Water Turbine Current Energy Converter CFD Results
Department of Energy —
The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is... -
Federal
Data from Numerical Modeling of Halona Oscillating Water Column Wave Energy Converter for Autonomous Underwater Vehicle Docking
Department of Energy —
In this project, we applied the Forchheimer flow model in Computational Fluid Dynamics (CFD) simulation to characterize the flow through an orifice used as a... -
Federal
TEAMER: Numerical Modeling of WECs to Support OES Task 10
Department of Energy —
This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions)... -
Federal
TEAMER: Assessing Structural Integrity of a Self-Reactive Point Absorber Subjected to Extreme Sea Conditions
Department of Energy —
This submission contains the numerical modeling data and analysis results generated for the structural integrity assessment of a self-reactive two-body point absorber... -
Federal
RANS Simulation ADM of the NREL Phase VI wind turbine modeled as MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
SMP and Fracture Modeling
Department of Energy —
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of... -
Federal
RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged... -
Federal
SMP Preparation, Programming, and Characterization
Department of Energy —
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of... -
Federal
RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
Python tools for OpenFOAM simulations of fused filaments in embedded 3D printing, Version 1.2.0
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of... -
Federal
Python tools for OpenFOAM simulations of filament shapes in embedded 3D printing, Version 1.1.0
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of... -
Federal
Advanced TidGen Power System - OpenFOAM Version 5 CFD Case Files
Department of Energy —
The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power... -
Federal
TEAMER: Original HANNA Mono-Radial Turbine Post Access Report
Department of Energy —
Final report on a TEAMER RFTS 2 (request for technical support) study undertaken by Alden Research Laboratory for the Mono-radial turbine invented by John Clark Hanna... -
Federal
RANS Simulation RRF of Single Lab-Scaled DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
Advanced TidGen Power System - ORPC Public Technical Report, Device Design
Department of Energy —
Technical report for public dissemination on the design progress for the Advanced TidGen(R) Power System. -
Federal
Advanced TidGen Power System 2.0 - Final BP1 Turbine Design Technical Report
Department of Energy —
The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power... -
Federal
RANS Simulation VBM of Single Lab Scaled DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
Aquantis 2.5 MW Ocean Current Generation Device - MHK Hydrofoils Design, Wind Tunnel Optimization and CFD Analysis Report
Department of Energy —
Dataset contains MHK Hydrofoils Design and Optimization and CFD Analysis Report for the Aquantis 2.5 MW Ocean Current Generation Device, as well as MHK Hydrofoils...
27 datasets found