-
Federal
Triton: Survivability Enhancement of a Multi-Mode Point Absorber
Department of Energy —
The overall goal of this project was to design and validate a survival mode for the Triton WEC that allows for a reduction in peak loads, while simultaneously... -
Federal
Evaluation of a Wave Powered Water Pump Performance by Ocean Field Testing and WEC-Sim Modeling
Department of Energy —
This submission from AMEC (the Atlantic Marine Energy Center) includes data from an ocean field deployment of a wave powered water pump in March 2023. The wave pump... -
Federal
H3 StingRAY Final Design and Technical Report
Department of Energy —
The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy... -
Federal
Wave Tank Testing of 1-DoF Heaving Buoy for Controls Validation Purposes
Department of Energy —
This submission includes the wave tank testing data used to validate the controls optimization efforts of a heaving 1-DoF buoy. -
Federal
Triton Point Absorber 1:30 Scale Tank Test Data for Extreme Wave Environments
Department of Energy —
This content model summarizes laboratory testing data for the Oscilla Power Triton WEC conducted at 1:30 scale. The WEC was tested in large operational waves and in... -
Federal
TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials
Department of Energy —
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD)... -
Federal
Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation
Department of Energy —
This paper presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic &... -
Federal
Centipod WEC, Advanced Controls, Final Technical Report
Department of Energy —
Final Technical Report for "Advanced Controls for the Multi-pod Centipod WEC device" describing project parameters, organization, task activities, accomplishments,... -
Federal
CalWave Device Behavior in Different Sea States from Scaled Tank Testing
Department of Energy —
This submission contains a summary of tank test derived WEC device behavior in different irregular sea states. CalWave sought to conduct experimental tank testing of... -
Federal
Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber
Department of Energy —
The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control... -
Federal
Triton-C Point Absorber Preliminary System Design Package
Department of Energy —
Preliminary System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface... -
Federal
Centipod WEC, Advanced Controls, Quarterly Technical Report
Department of Energy —
Quarterly Technical Report for "Advanced Controls for the Multi-pod Centipod WEC device" describing project parameters, organization, task activities,...