-
Federal
Fish Detection AI, Optic and Sonar-trained Object Detection Models
Department of Energy —
The Fish Detection AI project aims to improve the efficiency of fish monitoring around marine energy facilities to comply with regulatory requirements. Despite... -
Federal
Ocean Thermal Energy Conversion (OTEC) Datasets
Department of Energy —
The data presented here were collected from the Ocean Thermal Extractable Energy Visualization (OTEEV) project. The OTEEV project focused on assessing the Maximum... -
Federal
MHK Levelized Cost of Energy (LCOE) Guidance and Techno-Economic Analysis Materials
Department of Energy —
Useful information and tools for calculating the Levelized Cost of Energy (LCOE) and MHK Cost Breakdown Structure. Includes a structure for calculating the capital... -
Federal
Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
Reference Model 1 Cost Breakdown (RM1: Tidal Current Turbine)
Department of Energy —
Contains the Reference Model 1 (RM1) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM1 device... -
Federal
UNH TDP - Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary
Department of Energy —
This data was collected between October 12 and December 15 of 2021 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine... -
Federal
PacWave Site Observations
Department of Energy —
This data submission contains raw and near-real-time updated data from FLOATr (Fixed Location Ocean and Atmosphere Tracking) buoys, Sofar Spotter wave buoys, and... -
Federal
ALFA: SWIFT Buoy Data Under Extreme Wave Conditions at the Newport South Energy Test Site
Department of Energy —
Full data set (six deployments) from the Surface Wave Instrument Float With Tracking (SWIFT) buoy deployments at the Newport South Energy Test Site during extreme... -
Federal
Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging - Software and Data
Department of Energy —
Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and... -
Federal
Small Scale WEC Performance Modeling Data
Department of Energy —
Small Scale WEC Performance Modeling Data is performance data from downscaled models of common WEC devices and their calculated performance outputs. This data is used... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry... -
Federal
Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging - Year 3 Wave Flume Testing Data
Department of Energy —
This dataset contains data recordings generated during Year 3 of a DOE-funded project focused on the co-design of marine energy converters and autonomous underwater... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications... -
Federal
Centipod WEC, Advanced Controls, WaveDyn Models
Department of Energy —
Archive containing the WaveDyn models used for analysis of the Centipod WEC with and without Advanced Controls, i.e. the WaveDyn files contain a baseline model which... -
Federal
Focusing Wave Energy for Wave Energy Converter Applications
Department of Energy —
Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the...