9 datasets found
-
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
Particle and organic vapor emissions from children’s 3-D pen and 3-D printer toys
U.S. Environmental Protection Agency —
The data presented includes the total elemental analysis, via ICP-MS) of aerosol emissions from 3D printer of thermoplastic polymers. This dataset is associated with... -
Federal
OpenFOAM simulations of stress mitigation strategies in embedded 3D bioprinting
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Embedded 3D printing is particularly useful for... -
Federal
Metal composition of particle emissions from 3D printing
U.S. Environmental Protection Agency —
Data used to generate Table 2 and 3 in the manuscript Metal compositions of particle emissions from material extrusion 3D printing: Emission sources and indoor... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup
Department of Energy —
Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore... -
Federal
Data and Supplemental Figures from: Effect of pH adjustments on a novel micellar casein-based edible 3D printing formulation
Department of Agriculture —
Three-dimensional (3D) food printing holds the potential to help reduce food waste by precise portion control and use of materials that are produced in excess or are... -
Federal
Suppression of filament defects in embedded 3D printing: images and videos of single filament extrusion
National Institute of Standards and Technology —
These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were... -
Federal
Datasets for manuscript: Sustainability Assessment of Additive Manufacturing End-of-Life Material Management
U.S. Environmental Protection Agency —
The AM EoL - Material Flow Analysis and GREENSCOPE_11-25-23_TradeOff.xlsx file contains the data supporting the GREENSCOPE sustainability assessment associated with...
9 datasets found