52 datasets found for "usgsgroundwatermodel"
-
Federal
MODFLOW-NWT model to simulate the groundwater flow system near Puget Sound, Pierce and King Counties, Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system near Puget Sound, Pierce and King... -
Federal
MODFLOW-NWT model used to evaluate the potential effect of groundwater pumpage and increased sea level on canal leakage and regional groundwater flow in Miami-Dade County, Florida
Department of the Interior —
A three-dimensional, surface-water/groundwater model (MODFLOW-NWT with the Surface-Water Routing Process) was developed to the predict the effects of groundwater... -
Federal
MODFLOW-NWT model used to assess groundwater availability in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York to North Carolina
Department of the Interior —
A three-dimensional, groundwater flow model was developed with the numerical code MODFLOW-NWT to represent changes in groundwater pumping and aquifer recharge in the... -
Federal
MODFLOW-NWT groundwater flow model used to evaluate groundwater flow in the Elkhorn and Loup River Basins, Central Nebraska, Phase Three: U.S. Geological Survey data release
Department of the Interior —
The U.S. Geological Survey (USGS) refined the spatial and temporal discretization of a previously modeled area (Phase 1: https://pubs.usgs.gov/sir/2008/5143/ and... -
Federal
MODFLOW-NWT model of predictive simulations of groundwater response to selected scenarios in the Williston Basin, United States and Canada
Department of the Interior —
A three-dimensional groundwater flow model was developed to characterize groundwater resources of the uppermost principal aquifers in the Williston structural basin... -
Federal
MODFLOW-NWT model used to simulate the potential effects of out-of-basin transfers for the Rush Springs aquifer in the Caddo Nation of Oklahoma Tribal jurisdictional area, western Oklahoma
Department of the Interior —
A previously published MODFLOW 2005 groundwater model (https://doi.org/10.3133/sir20185136) of the Rush Springs aquifer was modified to assess the effects of... -
Federal
MODFLOW-NWT groundwater model demonstrating groundwater model calibration with repeat microgravity measurements
Department of the Interior —
A numerical model was developed using MODFLOW-NWT and FloPy to simulate groundwater flow and demonstrate a practical method for incorporating repeat microgravity... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
MODFLOW-NWT and MODPATH6 model use to analyze remedial scenarios affecting plume movement through a sole-source aquifer system, southeastern Nassau County, New York
Department of the Interior —
A three-dimensional steady-state groundwater flow model is coupled with the particle-tracking program, MODPATH, to assess the fate and transport of volatile organic... -
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW-NWT model used to evaluate groundwater withdrawal scenarios for the Rush Springs aquifer upgradient from the Fort Cobb Reservoir, western Oklahoma, 1979-2015, including streamflow, base flow, and precipitation statistics
Department of the Interior —
A previously published MODFLOW-NWT groundwater-flow model for the Rush Springs aquifer in western Oklahoma (using 1 steady state stress period followed by 444 monthly... -
Federal
MODFLOW-NWT model used to simulate and assess groundwater flow and surface-water exchanges in lakes of the Northeast Twin Cities Metropolitan Area, Minnesota, 2003 through 2013
Department of the Interior —
A three-dimensional, steady-state groundwater-flow model representing 2003-13 mean hydrologic conditions was developed and calibrated to assess groundwater and lake-... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
MODFLOW-NWT model of a hypothetical stream-aquifer system to assess capture map bias
Department of the Interior —
A MODFLOW-NWT (version 1.0.9) model of a hypothetical stream-aquifer system is presented for the evaluation and characterization of capture map bias. The hypothetical... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in the Salt Fork Red River aquifer, southwestern Oklahoma, 1980-2015
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, constructed a finite-difference numerical groundwater-flow model of the Salt Fork... -
Federal
MODFLOW-NWT model of the glacial aquifer system north of Aberdeen, South Dakota, through water year 2015
Department of the Interior —
A previously developed three-dimensional groundwater flow model (https://doi.org/10.3133/sir20125183) of the three primary aquifers in the region north of Aberdeen,... -
Federal
MODFLOW-NWT data sets for simulation of Effects of Surface-Water and Groundwater Inflows and Outflows on the Hydrology of the Tsala Apopka Lake Basin in Citrus County, Florida
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Southwest Florida Water Management District, calibrated a model to quantify the inflows and outflows in the Floral... -
Federal
MODFLOW-NWT model used to evaluate the groundwater availability of the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho
Department of the Interior —
A three-dimensional groundwater flow model (MODFLOW-NWT) of the Columbia Plateau Regional aquifer (CPRAS) in Washington, Oregon, and Idaho was developed to provide an... -
Federal
MODFLOW-NWT and MT3D-USGS models for evaluating heat flows, lags and dampening under high emission climate forcing for unsaturated/saturated transport in a synthetic watershed
Department of the Interior —
A 3-dimensional (3D) synthetic model, built for running with MODFLOW-NWT and MT3D-USGS, explores the new unsaturated zone heat transport capabilities in MT3D-USGS.... -
Federal
MODFLOW-NWT model used to assess groundwater availability in the uppermost principal aquifer systems of the Williston structural basin, United States and Canada
Department of the Interior —
A three-dimensional groundwater flow model was developed to characterize groundwater resources the uppermost principal aquifers in the Williston structural basin in...
52 datasets found for "usgsgroundwatermodel"