-
Federal
Utah FORGE Project 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone recent views
Department of Energy —
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE... -
Federal
Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage recent views
Department of Energy —
Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground... -
Federal
Utah FORGE Project 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements recent views
Department of Energy —
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical... -
Federal
EGS Collab Experiment 1: Microseismic Monitoring recent views
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
S-Layer Nanosheet Binding of Zn and Gd recent views
Department of Energy —
This data characterizes binding of Zn2+ and Gd3+ to engineered nanosheets at 40C and in a brine solution. The engineered nanosheets are composed of surface-layer... -
Federal
EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data recent views
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data recent views
Department of Energy —
In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently),... -
Federal
Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ recent views
Department of Energy —
This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES)... -
Federal
EGS Collab Experiment 1: Circulation Testing recent views
Department of Energy —
These data and test descriptions comprise a chilled circulation test conducted at the 164' fracture in the EGS Collab Experiment 1 testbed on the 4850 ft level of the... -
Federal
kISMET Core Photos and Descriptions recent views
Department of Energy —
These core photos and descriptions were taken from the five boreholes that were drilled as part of the kISMET SubTER project conducted at the Sanford Underground... -
Federal
kISMET Final Report and Highlights recent views
Department of Energy —
The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground... -
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling recent views
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
Post-Test SEM Examination of Brady Core, Desert Peak Core, and Stripa Granite Samples recent views
Department of Energy —
As part of the shear-induced permeability test of Brady well BCH-03, Desert Peak well DP 35-13, and Stripa granite samples, the three post-test (reacted) rock samples... -
Federal
Retrospective Analysis of Geothermal Mineral Recovery and Domestic Resource Assessment - References recent views
Department of Energy —
This reference database in RIS format contains all of the references that were collected as part of our retrospective analysis of geothermal mineral recovery (REE and... -
Federal
Shear Induced Permeability Test: Brady and Desert Peak Core X-Ray CT Files recent views
Department of Energy —
As part of the shear induced permeability test, the rock cores were also scanned with X-ray Computed Tomography (CT) before and after sustainability tests using a... -
Federal
Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis recent views
Department of Energy —
Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a... -
Federal
Data Sets for Evaluation of Building Fault Detection and Diagnostics Algorithms recent views
Department of Energy —
This documentation and dataset can be used to test the performance of automated fault detection and diagnostics algorithms for buildings. The dataset was created by...