-
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Experimental Measurements for Fire Model Validation - Parallel Panel Tests on PMMA
National Institute of Standards and Technology —
A set of 6 experiments was performed on poly(methyl methacrylate), PMMA. In each test, samples (i.e., 2.44 m tall, 0.61 m wide slabs of PMMA mounted in a parallel... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Taxonomy for NIST Website
National Institute of Standards and Technology —
This is the taxonomy that is used for classifying information on the NIST website. It comprises a set of top-level designations that include the research areas within... -
Federal
Data from "High-temperature tensile constitutive data and models for structural steels in fire (NIST Technical Note 1714)"
National Institute of Standards and Technology —
The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Hestia Fossil Fuel Carbon Dioxide Emissions Inventory for Los Angeles Basin
Department of Commerce —
Hestia Project quantifies, simulates and visualizes greenhouse gases such as carbon dioxide emitted in urban regions. Los Angeles basin activity is provided at the 1... -
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
Department of Commerce —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Methane emissions estimates and related data sets for Washington DC and Baltimore, MD urban areas
Department of Commerce —
This dataset accompanies the publication below. Here we provide the results of the analysis, including gridded estimates of methane emissions for the... -
Federal
Biphenyl: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption Spectroscopy
National Institute of Standards and Technology —
Data set from peer-reviewed publication: A. J. Fleisher et al., Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data for "Using Commercial Source Measure Units for Traceable RF Power Measurements" for the 2024 ARFTG conference in Washington, DC.
Department of Commerce —
As a National Metrology Institute (NMI), the National Institute of Standards and Technology (NIST) maintains traceable measurement capabilities for a variety of... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
Data to accompany the paper "Entropy Scaling of Viscosity -- II: Predictive Scheme for Normal Alkanes"
Department of Commerce —
Viscosity data for normal alkanes (methane, ethane, etc.) taken from the literature to accompany the paper "Entropy Scaling of Viscosity -- II: Predictive Scheme for... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-...