27 datasets found for "Temperature"
-
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
ANDiE: the Autonomous Neutron Diffraction Explorer.
Department of Commerce —
ANDiE the Autonomous Neutron Diffraction Explorer is a tool for autonomously discovering the magnetic transition temperature and transition dynamics of a material... -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
Department of Commerce —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
PROperties of FIre Suppressant SYstems: "PROFISSY" - A Spreadsheet Application for Fire-Suppressant Bottle-Filling Calculations
Department of Commerce —
This spreadsheet and accompanying files are the result of work performed for U.S. Army Ground Vehicle Systems Center by the National Institute of Standards and... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #1)
Department of Commerce —
The compartment fire test was conducted on the 9.1 m x 6.1 m steel-concrete composite floor, located in the south-central bay of the two-story steel gravity frame two... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
Department of Commerce —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
Department of Commerce —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
Department of Commerce —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
In situ thermography of the metal bridge structures fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)
Department of Commerce —
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of... -
Federal
Optical n(p, T_90) measurement suite 2: H_2O and D_2O
Department of Commerce —
Supplementary data for the article "Optical n(p, T_{90}) measurement suite 2: H_2O and D_2O" in International Journal of Thermophysics, by P.F Egan and Y. Yang.The... -
Federal
Demonstration of dispersion gas barometry
Department of Commerce —
Supplemental material to the 2025 article "Demonstration of dispersion gas barometry" by Y. Yang, J.A. Stone, and P.F. Egan.The archive file contains two-color data... -
Federal
Thermal Conductivity of Binary Mixtures of 1,1,1,2-Tetrafluoroethane(R-134a), 2,3,3,3-Tetrafluoropropene (R-1234yf), and trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants
Department of Commerce —
Workflow: The data that falls into this category are gathered from a measurement program and are published in the archival literature. -
Federal
Data to accompany the paper "Comparison of Heat Capacity Measurements of Alternative and Conventional Aviation Fuels"
Department of Commerce —
The data are averaged specific heat capacity measurement results and associated expanded uncertainties for nine conventional and alternative aviation fuels (Jet A,... -
Federal
Simultaneous rheology and cure kinetics dictate thermal post-curing of thermoset composite resins for material extrusion
Department of Commerce —
Thermoset composite structures printed at room temperature using direct ink writing often collapse during thermal post-curing. This behavior suggests that the... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
Department of Commerce —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
A Dynamic Plasticity Model for Rapidly-Heated 1045 Steel up to 1000 °C
Department of Commerce —
This dataset contains raw mechanical data (strain, stress and strain rate curves and initial temperatures) for compression experiments performed on annealed 1045... -
Federal
In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy 625 Artifact with Various Overhangs and Supports
Department of Commerce —
This document provides details on the experiment and associated measurement files available for download in the dataset ?In Situ Thermography During Laser Powder Bed... -
Federal
CMOS Sky130 Primitives measured at cryogenic temperatures
Department of Commerce —
Sky130 is an open source complimentary metal oxide semiconductor (CMOS) technology manufactured by Skywater Technology in its facility in Bloomington, Minnesota.... -
Federal
Software and Data associated with "Binding, Brightness, or Noise? Extracting Temperature-dependent Properties of Dye Bound to DNA"
Department of Commerce —
The purpose of this software and data is to enable reproduction and facilitate extension of the computational results associated with the following referenceDeJaco,...
27 datasets found for "Temperature"