-
Federal
NWEI Azura January 2016 Data
Department of Energy —
Data files for the NWEI Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base... -
Federal
Development of Classification Systems for Wave Energy Resources and WEC Technologies
Department of Energy —
The submission includes wave resource classification reports, summary of classification statistics and regional trends, and data files with classification statistics... -
Federal
TEAMER: MADWEC Techno-Economic Analysis
Department of Energy —
The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC),... -
Federal
NREL MOIS Data for NWEI Azura October 2015
Department of Energy —
NREL Modular Ocean Instrumentation System (MOIS) data files for the Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications... -
Federal
StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers
Department of Energy —
Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the... -
Federal
Reference Model 3 Cost Breakdown (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM3 device... -
Federal
StingRAY WEC Risk Register
Department of Energy —
Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL. -
Federal
H3 StingRAY Final Design and Technical Report
Department of Energy —
The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy... -
Federal
LCOE Content Model for the Heaving Point Absorber Buoy
Department of Energy —
This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-... -
Federal
NWEI Azura Technology Demonstration at WETS - Final Reports
Department of Energy —
This submission contains the final scientific and technical report for the Azura technology demonstration at WETS. Also contained are all test reports as referenced... -
Federal
TEAMER: CFD Data on a Vertical Axis Wave Turbine
Department of Energy —
In this study from January to July of 2023, different variations of the original geometry of a vertical-axis wave turbine (VAWT) were generated and evaluated for... -
Federal
Laboratory Upgrade Point Absorber (LUPA) CAD Files
Department of Energy —
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD)... -
Federal
TEAMER: Biofouling and Corrosion Study for a Novel Linear Guided Wave Energy Converter
Department of Energy —
This dataset contains data recordings used to generate the figures included in the Post Access Report for the TEAMER project "Biofouling and Corrosion Study for a... -
Federal
Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
HERO WEC V1.0 - WEC-Sim Model
Department of Energy —
This zip file contains the files that are needed to simulate NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter). This requires the user to...