16 datasets found
-
Federal
M3 Wave DMP/APEX WEC Numerical Survivability Report - Baseline Geometry
Department of Energy —
Summary of numerical survivability modeling method for the baseline geometry of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." -
Federal
RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing
Department of Energy —
Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged... -
Federal
STRESSINVERSE Software for Stress Inversion
Department of Energy —
The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts... -
Federal
M3 Wave DMP/APEX WEC Final Technical Report
Department of Energy —
This project successfully developed methods for numerical modeling of sediment transport phenomena around rigid objects resting on or near the ocean floor. These... -
Federal
RANS Simulation ADM of the NREL Phase VI wind turbine modeled as MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
Triton-C WEC Numerical and LCOE Content Models (DDP)
Department of Energy —
These are the Content Models for the Triton-C multi-mode point absorber WEC based on the Detailed System Design Package (DDP), including WEC Numerical and LCOE... -
Federal
Understanding Constraints on Geothermal Sustainability Through Reservoir Characterization at Brady Geothermal Field, Nevada
Department of Energy —
The vast supply of geothermal energy stored throughout the Earth and the exceedingly long time required to dissipate that energy makes the world's geothermal energy... -
Federal
WISE-CASING: Frequency Domain EM Data from Cymric Oil Field, CA
Department of Energy —
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to... -
Federal
Brady Hot Springs Seismic Modeling Data for Push-Pull Project
Department of Energy —
This submission includes synthetic seismic modeling data for the Push-Pull project at Brady Hot Springs, NV. The synthetic seismic is all generated by finite-... -
Federal
RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-... -
Federal
ALFA Coupled Computational Fluid Dynamics/Discrete Element Method Modeling System
Department of Energy —
The HDIS/COUPi discrete element method modeling system was used to simulate the interaction between various debris and the Research Debris Diversion Platform (RDDP) -
Federal
WISE-CASING: DC Simulation at Containment and Monitoring Institute (CaMI), Calgary, Canada
Department of Energy —
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important... -
Federal
Modeling and Performance Data for Heaving Buoy Wave Energy Converter with a Compressible Degree of Freedom (CDOF)
Department of Energy —
Modeling and performance data in Matlab data file (.mat) containing 3 structures (WEC model, simRes_sr and simRes_fix), and a pdf document describing the model, the... -
Federal
Utah FORGE: Data for 3-D Model Development - Lithology, Temperature, Pressure, and Stress
Department of Energy —
This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files... -
Federal
Physical and Numerical Modeling Open Source Files and Datasets for 1:6 Scale Reference Model 2 (RM2) Cross-Flow Turbine
Department of Energy —
This submission includes Github links to open source files and data sets, including the numerical model, CACTUS, input files, source code and output files, CAD files... -
Federal
Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter
Department of Energy —
Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were...
16 datasets found