39 datasets found
-
Federal
Airfoil Computational Fluid Dynamics - 2k shapes, 25 AoA's, 3 Re numbers
Department of Energy —
This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and... -
Federal
Airfoil Computational Fluid Dynamics - 9k shapes, 2 AoA's
Department of Energy —
This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and... -
Federal
Reference Model 1 Scaled Geometry (RM1: Tidal Current Turbine)
Department of Energy —
Contains the Reference Model 1 (RM1) scaled scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
TEAMER: Numerical Modeling of WECs to Support OES Task 10
Department of Energy —
This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions)... -
Federal
Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter
Department of Energy —
Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were... -
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
INTEGRATE - Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements
Department of Energy —
The INTEGRATE (Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements) project is developing a new inverse-design... -
Federal
Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology
Department of Energy —
The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate... -
Federal
Design of high-deflection foils MHK applications - CFD models - Helical turbines
Department of Energy —
The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow... -
Federal
TEAMER: Mass of Water Turbine Current Energy Converter CFD Results
Department of Energy —
The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is... -
Federal
Advanced TidGen Power System - Preliminary Turbine Hydrodynamic Design
Department of Energy —
The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power... -
Federal
SMP and Fracture Modeling
Department of Energy —
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of... -
Federal
RANS Simulation VBM of Single Full Scale DOE RM1 MHK Turbine
Department of Energy —
Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for Reynolds Averaged... -
Federal
ALFA Coupled Computational Fluid Dynamics/Discrete Element Method Modeling System
Department of Energy —
The HDIS/COUPi discrete element method modeling system was used to simulate the interaction between various debris and the Research Debris Diversion Platform (RDDP) -
Federal
Data from Numerical Modeling of Halona Oscillating Water Column Wave Energy Converter for Autonomous Underwater Vehicle Docking
Department of Energy —
In this project, we applied the Forchheimer flow model in Computational Fluid Dynamics (CFD) simulation to characterize the flow through an orifice used as a... -
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
TEAMER: Experimental performance characterization of a shrouded axial-flow turbine
Department of Energy —
Sitkana has developed a shrouded hydrokinetic turbine with a modular, low-cost design that can be scaled to meet the needs of remote communities. With technical... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications...
39 datasets found