-
Federal
Utah FORGE: Well 16A(78)-32 Core-Flooding Experiment Results
Department of Energy —
This dataset contains core-flood experimental results from the Utah FORGE project, generated through laboratory tests at Lawrence Livermore National Laboratory. The... -
Federal
Brady Geothermal 1D Seismic Velocity Model
Department of Energy —
This submission contains an ASCII text file of seismic velocities derived from ambient noise cross-correlation used to create a model of seismic velocity as a 1-D... -
Federal
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations
Department of Energy —
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk : FY1 Final... -
Federal
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core
Department of Energy —
This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD... -
Federal
Illite Dissolution Rates and Equation (100 to 280 deg C)
Department of Energy —
The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and... -
Federal
Brady 1D Seismic Velocity Model Ambient Noise Prelim
Department of Energy —
Preliminary 1D seismic velocity model derived from ambient noise correlation. 28 Green's functions filtered between 4-10 Hz for Vp, Vs, and Qs were calculated. 1D... -
Federal
Surface Complexation Modeling of Terbium Biosorption onto E. Coli Bacterial Surfaces with Lanthanide Binding Tags
Department of Energy —
Lanthanide binding tags (LBTs) have been engineered onto native Escherichia coli (E. coli) bacterial surfaces to enhance extraction and recovery of rare earth... -
Federal
Fully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications
Department of Energy —
The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in... -
Federal
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations
Department of Energy —
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk: FY1 Final... -
Federal
Grain-Scale Failure in Thermal Spallation Drilling
Department of Energy —
Geothermal power promises clean, renewable, reliable and potentially widely-available energy, but is limited by high initial capital costs. New drilling technologies... -
Federal
Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS
Department of Energy —
The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems... -
Federal
Gas Propagated Borehole Fracture Model And Simulation
Department of Energy —
We developed a model for fracture production produced during detonation of an explosive mixture in a 10m packed off section of a shallow borehole. The model is based... -
Federal
Recovery of Rare Earth Elements from Geothermal Fluids through Bacterial Cell Surface Adsorption
Department of Energy —
We summarized the FY17 and part of FY18 results of the analysis of the effect of several parameters (e.g., total dissolved solids, specific competing metals, pH, and... -
Federal
Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10
Department of Energy —
We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously...