81 datasets found
-
Federal
Utah FORGE 3-2535: Report on Geodetic Observations of Fracture Development During April 2024 Stimulations
Department of Energy —
This report presents geodetic observations from the April 2024 stimulations at the Utah FORGE site, as part of LBNL FORGE Project 3-2535. It focuses on Distributed... -
Federal
EGS Collab Experiment 1: Microseismic Monitoring
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
EGS Collab Experiment 2: Testbed Well Orientation Data
Department of Energy —
This dataset contains the north seeking gyro data for each of the 11 boreholes drilled at the Experiment 2 testbed on the 4100 foot level of the SURF (Sanford... -
Federal
WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Coaxial Cable
Department of Energy —
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable.... -
Federal
WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Steel Pipe
Department of Energy —
The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental... -
Federal
Utah FORGE 3-2535: Joint EM-Seismic-InSAR Imaging of Fracture Properties - Workshop Presentation
Department of Energy —
This is a presentation on the Joint Electromagnetic/Seismic/InSAR Imaging of Spatial-Temporal Fracture Growth and Estimation of Physical Fracture Properties During... -
Federal
Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis
Department of Energy —
Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a... -
Federal
Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ
Department of Energy —
This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES)... -
Federal
Utah FORGE: LBNL Status Report on the VEMP Tool 2022
Department of Energy —
This report describes the current status of the Vertical Electromagnetic Profiling, or VEMP tool, that is on loan to Lawrence Berkeley National Lab (LBNL) from... -
Federal
EGS Collab Experiment 2: 4100 Foot Level Elastic Property Data
Department of Energy —
Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100... -
Federal
EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper
Department of Energy —
Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have... -
Federal
Utah FORGE 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone
Department of Energy —
Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design - this milestone report describes the 3D modeling studies of energized steel-casing... -
Federal
Post-Test SEM Examination of Brady Core, Desert Peak Core, and Stripa Granite Samples
Department of Energy —
As part of the shear-induced permeability test of Brady well BCH-03, Desert Peak well DP 35-13, and Stripa granite samples, the three post-test (reacted) rock samples... -
Federal
Cranfield Thermosiphon Test DTS Data
Department of Energy —
Thermal profile data acquired using Silixa Ultima Distributed Temperature Sensor (DTS) at Cranfield, MS field test -
Federal
Reactive Transport Simulations of High-Tempertature Geologic Thermal Energy Storage (GeoTES) in Deep Saline Formations - I/O Files
Department of Energy —
Simulation input and output files, post-processed figures and excel tables, and tecplot layout files for generating figures. These simulations were run with... -
Federal
Fracture Sustainability Test, Pre- and Post-Test Photomicrographs
Department of Energy —
The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the... -
Federal
Shear Induced Permeability Test: Stripa Granite X-Ray CT Files and Explanation
Department of Energy —
This folder contains X-ray CT images and an explanation related to the shear induced permeability testing of Stripa granite -
Federal
Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone
Department of Energy —
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE... -
Federal
CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations
Department of Energy —
This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after...
81 datasets found