-
Federal
Radio Access Network Anomalous State Detection Dataset
National Institute of Standards and Technology —
This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption Spectroscopy
National Institute of Standards and Technology —
Data set from peer-reviewed publication: A. J. Fleisher et al., Absolute 13C/12C Isotope Amount Ratio for Vienna Pee Dee Belemnite from Infrared Absorption... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
In-situ Raman spectra of indented fused silica
Department of Commerce —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Nanoindentation study on the phase transformation of single crystal silicon of different crystallographic orientations using a spherical indenter probe
National Institute of Standards and Technology —
The effect of the crystallographic orientation on the primary and secondary phase transformations of single-crystal silicon (Si) during indentation was investigated... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
Department of Commerce —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Traceable RF Power Metering Procedures With Thermoelectric Sensors.
National Institute of Standards and Technology —
The National Institute of Standards and Technology (NIST) maintains the United States' primary standards for traceable RF and mm-wave power measurements. In the 2.4... -
Federal
In situ methane mole fraction observations from three sites in the Washington DC region from the NIST Northeast Corridor Project: January 2015 - December 2022
National Institute of Standards and Technology —
Methane (CH4) mole fraction data collected from three tower sites in the Washington DC area: Bucktown, MD (BUC, ghg01), Stafford, VA (SFD, ghg65), and Thurmont, MD... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
SDNist v1.3: Temporal Map Challenge Environment
Department of Commerce —
SDNist (v1.3) is a set of benchmark data and metrics for the evaluation of synthetic data generators on structured tabular data. This version (1.3) reproduces the... -
Federal
Experimental Measurements for Fire Model Validation - Parallel Panel Tests on PMMA
National Institute of Standards and Technology —
A set of 6 experiments was performed on poly(methyl methacrylate), PMMA. In each test, samples (i.e., 2.44 m tall, 0.61 m wide slabs of PMMA mounted in a parallel... -
Federal
Hestia Fossil Fuel Carbon Dioxide Emissions Inventory for Los Angeles Basin
National Institute of Standards and Technology —
Hestia Project quantifies, simulates and visualizes greenhouse gases such as carbon dioxide emitted in urban regions. Los Angeles basin activity is provided at the 1... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Observations of CO2, CH4, and CO mole fractions from the NIST Northeast Corridor urban testbed
National Institute of Standards and Technology —
NOTE: please see the latest (March 2025) update at https://doi.org/10.18434/mds2-3765. Hourly observations of CO2 and CH4 from tower-based sites in the NIST Northeast... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
National Institute of Standards and Technology —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and... -
Federal
Data to support Seasonal blubber steroid profiles of free-ranging bottlenose dolphins (Tursiops truncatus)
Department of Commerce —
Liquid chromatography tandem mass spectrometry allows for the measurement of steroid hormone suites in the blubber of marine mammals. By combining this technology...