-
Federal
SRM 3165 Vanadium (V) Standard Solution Lot No. 992706
Department of Commerce —
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of vanadium. A unit of SRM 3165... -
Federal
Cost Assessment Tool for Sustainable Manufacturing (CATS)
Department of Commerce —
This tool uses techniques from ASTM E3200 for evaluating manufacturing investments from the perspective of environmentally sustainable manufacturing by pairing... -
Federal
Data Files Associated with Orthogonal Machining Tests on Carbon Fiber Reinforced Plastics (CFRP)
Department of Commerce —
This dataset is a supplement to the paper titled "Fiber Orientation Angle Effects in Machining of Unidirectional CFRP Laminated Composites"... -
Federal
Data to accompany the paper "Heat capacity measurements of conventional aviation fuels"
Department of Commerce —
The data are averaged specific heat capacity measurement results and associated expanded uncertainties for six conventional aviation fuels (JP-10, JP-7, JP-4, JP-TS,... -
Federal
A Benchmark for 3D Interest Point Detection Algorithms
National Institute of Standards and Technology —
This benchmark aims to provide tools to evaluate 3D Interest Point Detection Algorithms with respect to human generated ground truth. Using a web-based subjective... -
Federal
Supplemental data for "Comparison of measured and simulated spin-wave mode spectra of magnetic nanostructures" by H. T. Nembach, R.D. McMichael, M.L. Schneider, J.M. Shaw, T.J. Silva.
National Institute of Standards and Technology —
Supplemental data for "Comparison of measured and simulated spin-wave mode spectra of magnetic nanostructures" by H. T. Nembach, R.D. McMichael, M.L. Schneider, J.M.... -
Federal
AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03)
Department of Commerce —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with bare plate single track and pad laser scans performed on the... -
Federal
SRM 3104a Barium (Ba) Standard Solution Lot No. 140909
Department of Commerce —
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of barium. A unit of SRM 3104a... -
Federal
ThermoData Engine free public version
Department of Commerce —
A computer program for accessing and visualization of thermodynamic and transport property data for chemical compounds and mixtures available at the TRC/NIST ThermoML... -
Federal
Small-angle Scattering Data and Model Structures that were used in writing, "Structural Characterization and Modeling of a Respiratory Syncytial Virus Fusion Glycoprotein Nanoparticle Vaccine in Solution" by S. Krueger, J.E. Curtis, D. Scott, A. Grishaev, G. Glenn, T. Hahn, G. Smith, L. Ellingsworth, O. Borisov and E. Maynard.
Department of Commerce —
Reduced small-angle x-ray and neutron scattering data in ASCII format and model structures for the Novavax, Inc. Respiratory Syncytial Virus (RSV) Fusion Glycoprotein... -
Federal
SRM 1958 Organic Contaminants in Fortified Human Serum (Freeze-Dried)
Department of Commerce —
SRM 1958 Organic Contaminants in Fortified Human Serum (Freeze-Dried) - This Standard Reference Material (SRM) is intended for use in evaluating analytical methods... -
Federal
SRM 3181 Sulfate Anion (SO42-) Standard Solution
Department of Commerce —
This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of sulfate using anion ion... -
Federal
Aged and unaged ultra high molar mass polyethylene flexible unidirectional composite laminate tensile testing for soft body armor applications
Department of Commerce —
This dataset contains mechanical testing data at two different loading rates for two different aging conditions (wet and dry at 70 °C) for five different extraction... -
Federal
NIST Database of Cross Sections for Inner-Shell Ionization by Electron or Positron Impact - SRD 164
Department of Commerce —
The NIST Database of Cross Sections for Inner-Shell Ionization by Electron or Positron Impact provides cross sections for ionization of the K shell and of the L and M... -
Federal
SRM 1953 Organic Contaminants in Non-Fortified Human Milk
National Institute of Standards and Technology —
SRM 1953 Organic Contaminants in Non-Fortified Human Milk - This Standard Reference Material (SRM) is intended for use in evaluating analytical methods for the... -
Federal
Genome In A Bottle - v2.0 Genome Stratifications (Deprecated)
National Institute of Standards and Technology —
These stratification BED files from the Global Alliance for Genomics and Health (GA4GH) Benchmarking Team and the Genome in a Bottle Consortium are intended as a... -
Federal
SRM 895 Stainless Steel (SAE 201)
Department of Commerce —
This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in... -
Federal
Modeling Line Broadening and Distortion Due to Inhomogeneous Fields for Rydberg Electrometry
Department of Commerce —
This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous... -
Federal
On-Chip Frequency Conversion Using Kinetic Inductance Within a Coplanar Waveguide, IEEE Transactions on Applied Superconductivity 2024
Department of Commerce —
Dataset for publishable figures in a "On-Chip Frequency Conversion Using Kinetic Inductance Within a Coplanar Waveguide" manuscript to be submitted to IEEE...- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- The *.txt file data is a csv file with labeled headers. First row is a description, second row is column header enclosed in square brackets "[column header]" with units and a "," column delimiter, remaining rows are data with a "," column delimiter. Unused column entries are designated with "--". The *.fig file data is a matlab figure file duplicating the data in the similarly named *.txt files.
- 18 more in dataset