-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Forecasting demand data for critical materials
National Institute of Standards and Technology —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
Reference Data Set of Human Skin Reflectance
National Institute of Standards and Technology —
This data set contains 100 reference reflectance spectra of human skin, spanning the wavelength region from 250 nm to 2500 nm. The spectra were acquired with a... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Bluetooth Low Energy (BLE) Received Signal Strength Indicator (RSSI) Data for Proximity Detection in COVID-19 Electronic Contact Tracing
National Institute of Standards and Technology —
NIST carried out a comprehensive BLE RSI data collection campaign under various operational scenarios. In some scenarios, the transmitting and receiving BLE radios... -
Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
Radio Frequency Interference Measurements of Industrial Machinery
Department of Commerce —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Open Media Forensics Challenge (OpenMFC) Evaluation Datasets
National Institute of Standards and Technology —
The datasets contain the following parts for Open Media Forensics Challenge (OpenMFC) evaluations:1. NC16 Kickoff dataset2. NC17 development and evaluation datasets3.... -
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Distributed Sensing of Radio Spectrum Occupancy Amid COVID-19
National Institute of Standards and Technology —
During the COVID-19 pandemic, National Institute of Standards and Technology (NIST) performed a targeted campaign of measurements of channel power and occupancy rate... -
Federal
NDRL/NIST Solution Kinetics Database - SRD 40
National Institute of Standards and Technology —
The NDRL/NIST Solution Kinetics Database contains data on rate constants for solution-phase chemical reactions. The database is designed to be searched by reactants,... -
Federal
AM Bench 2018 measurement results data: optical microscopy of laser-scanned single tracks on nickel Alloy 625 plates (AMB2018-02)
National Institute of Standards and Technology —
The following optical micrograph data files are provided in support of the AM Bench 2018 modeling challenges associated with bare plate single track laser scans... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Data supporting the case study of the 2018 Camp Fire
National Institute of Standards and Technology —
The Camp Fire ignited on November 8, 2018 in the foothills of the Sierra Nevada in Butte County, California. The first 24 hours were characterized by a fast-moving... -
Federal
HOTA-ReID: Accelerated Higher Order Tracking Accuracy for Re-Identification
National Institute of Standards and Technology —
HOTA-ReID is a modified version of the Higher Order Tracking Accuracy (HOTA) metric specifically designed to support Re-Identification (ReID) problems while providing... -
Federal
Dataset of Published Concentrations of Plastic Additives in the Ocean
National Institute of Standards and Technology —
Concentrations of plastic additive chemicals were taken from peer-reviewed literature. Only studies that mentioned the chemicals as plastic additives were included.... -
Federal
Time Series Data from Sensors in the Duct Above a Kitchen Cooktop During Normal Cooking and Ignition Conditions
National Institute of Standards and Technology —
This data set includes the time series data from 16 electrochemical, optical, temperature and humidity sensors in 60 experiments to characterize the conditions...