-
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW-2005, MODFLOW-NWT, and SEAWAT models used to simulate variable-density groundwater flow and contaminant transport at Naval Base Kitsap, Keyport, Washington
Department of the Interior —
The U.S. Geological Survey, in cooperation with the U.S. Department of the Navy, developed several 3-D groundwater flow models for used with MODFLOW-2005, MODFLOW-... -
Federal
MODFLOW-NWT datasets for the simulation of the drainage infrastructure and groundwater system response to changes in sea level and precipitation, Broward County, Florida
Department of the Interior —
The U.S. Geological Survey, in cooperation with Broward County Environmental Planning and Resilience Division, has developed a groundwater/surface-water model to... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
MODFLOW-NWT model used to simulate groundwater levels in the Des Moines River alluvial aquifer near Des Moines, Iowa
Department of the Interior —
The U.S. Geological Survey constructed a steady-state numerical groundwater flow model in cooperation with Des Moines Water Works (DMWW) to simulate groundwater flow... -
Federal
MODFLOW-NWT model used to evaluate potential effects of alterations to the hydrologic system in the vicinity of Long Lake, Indiana Dunes National Lakeshore, near Gary, Indiana
Department of the Interior —
A three dimensional groundwater flow model (MODFLOW-NWT) was developed to examine the effects of changes to engineering controls and Lake Michigan surface water... -
Federal
Statistical and groundwater-flow models of the Fountain Creek alluvial aquifer near Colorado Springs, Colorado
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Air Force Civil Engineering Center, created a numerical groundwater-flow model for the Fountain Creek... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in reaches 3 and 4 of the Washita River aquifer, southern Oklahoma, 1980–2017
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Oklahoma Water Resources Board (OWRB), constructed a finite-difference numerical groundwater-flow model of... -
Federal
GSFLOW, used to run PRMS and MODFLOW-NWT models, to simulate the effects of natural and anthropogenic impacts on water resources in the Rio San Jose Basin and surrounding areas, New Mexico
Department of the Interior —
The Rio San Jose Integrated Hydrologic Model (RSJIHM) is a sequentially linked, integrated hydrologic model utilizing the Precipitation-Runoff Modeling System (PRMS)... -
Federal
MODFLOW-NWT model scenarios used to evaluate potential effects of proposed drainage modifications on groundwater discharge in the vicinity of Long Lake, Indiana Dunes National Lakeshore, near Gary, Indiana
Department of the Interior —
A previously developed three-dimensional groundwater-flow model that used the MODFLOW-NWT code was updated to simulate the effects of various proposed drainage... -
Federal
MODFLOW-NWT, MODPATH, and MT3DMS models used to study of hypothetical horizontal water-supply well design for New Hampshire and surrounding regions: U.S. Geological Survey data release
Department of the Interior —
A series of three-dimensional, hypothetical, groundwater models (MODFLOW-NWT) were developed to investigate the effects of a variety of factors on the flow of... -
Federal
MODFLOW simulator used to assess groundwater flow for the Whiting Field Naval Air Station, Milton, FL
Department of the Interior —
The study of Whiting Field Naval Air Station, Milton Florida requires numerical modeling of the groundwater system to determine the fate of contaminants released at... -
Federal
Heuristic MODFLOW models used to evaluate the effects of pumping groundwater from confined aquifers overlain by till confining units
Department of the Interior —
This groundwater-flow model archive contains heuristic model simulations evaluating the sustainability of groundwater withdrawals from public-water-supply wells on... -
Federal
MODFLOW-NWT and MODPATH5 used to evaluate groundwater availability, geochemistry, and flow pathways to public-supply wells in the Atlantic Coastal Plain and bedrock aquifers, Aiken County and part of Lexington County, South Carolina, 2015-2019
Department of the Interior —
The U.S. Geological Survey, in cooperation with Aiken County; City of Aiken; Breezy Hill Water and Sewer Company, Inc.; Montmorenci-Couchton Water and Sewer District,... -
Federal
MODFLOW-NWT and GFLOW model of groundwater flow and groundwater/surface water interactions in Columbia County, Wisconsin
Department of the Interior —
A MODFLOW-NWT model was used to simulate long-term, average conditions in the regional, Columbia County groundwater system since about 1970. A GFLOW model was used to... -
Federal
GSFLOW groundwater-surface-water model 2016 update for the Trout Lake Watershed
Department of the Interior —
A 2016 update was made to the GSFLOW model documented in SIR 2013-5159, which is available online ( https://pubs.usgs.gov/sir/2013/5159/ ). The original GSFLOW model... -
Federal
MODFLOW-NWT model used to assess historical and future trends in groundwater availability in the Trinity River alluvium aquifer, Texas
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Trinity River Authority, the Tarrant Regional Water District, the City of Dallas, and the North Texas Municipal... -
Federal
MODFLOW-NWT groundwater model demonstrating groundwater model calibration with repeat microgravity measurements
Department of the Interior —
A numerical model was developed using MODFLOW-NWT and FloPy to simulate groundwater flow and demonstrate a practical method for incorporating repeat microgravity... -
Federal
MODFLOW-NWT, MT3D-USGS, and VS2DH models of 6 hypothetical 1-dimensional variably saturated systems to demonstrate the accuracy of new heat transport capabilities in MT3D-USGS
Department of the Interior —
Six hypothetical 1-dimensional models are used to verify and demonstrate new unsaturated-zone heat transport functionality added to MT3D-USGS (version 1.1.0). Because...