Skip to main content
U.S. flag

An official website of the United States government

Surface underway measurements partial pressure of carbon dioxide (pCO2) in the water and atmosphere, sea surface salinity, sea surface temperature, oxygen and other parameters during the Alaska Marine Highway System M/V Columbia 135 service route transits along British Columbia coast, southeast Alaska coast, Gulf of Alaska and North Pacific Ocean from 2017-10-26 to 2019-10-04 (NCEI Accession 0209049)

Published by NOAA National Centers for Environmental Information | National Oceanic and Atmospheric Administration, Department of Commerce | Catalog Last Checked: August 03, 2026 at 03:33 AM | Dataset Last Updated: April 04, 2020 at 12:00 AM
This dataset includes continuous sea surface underway measurements of partial pressure of carbon dioxide (pCO2) in the water and atmosphere, sea surface salinity, sea surface temperature, oxygen and and barometric pressure during the Alaska Marine Highway System M/V Columbia 135 service route transits along British Columbia coast, southeast Alaska coast, Gulf of Alaska and North Pacific Ocean from 2017-10-26 to 2019-10-04. The service route of the Columbia included the ports of Sitka, Juneau, Haines, Skagway, Wrangell, Petersburg, and Ketchikan in southeast Alaska, and between Ketchikan and Bellingham, WA. The vessel sailed south from Ketchikan every Wednesday, arrived in Bellingham on Friday, returned to Ketchikan on Sunday, and transited between southeast Alaska terminals between Sunday and Wednesday. Measurements of temperature, salinity, dissolved oxygen content, and CO2 partial pressure were made every 2 mins on seawater drawn into the vessel from a ~2 m intake. Seawater was delivered from the intake to analytical equipment on the car deck using a AMT 1/2 HP pump (4295-98). Temperature and salinity data were collected using a Sea-Bird SBE 45 MicroTSG Thermosalinograph, and intake temperature measured using a SBE 38 Digital Oceanographic Thermometer. Dissolved oxygen content was determined using an Aanderaa 4330F that had undergone multipoint calibration at the factory in Norway. CO2 measurements were made using a General Oceanics 8050 (GO8050) pCO2 Measuring System equipped with a LI-COR LI840A non-dispersive infrared detector. All data streams, including GPS information from an antenna and atmospheric pressure from a Druck barometer positioned on the foredeck, were captured by the GO8050 control computer. Atmospheric CO2 measurements were also made using the GO8050 on unaltered marine air drawn to the system through an intake located on the foredeck. The CO2 measurement scheme involved the analysis of four gas standards of known CO2 content (150 ppm, 349 ppm, 449 ppm, and 850 ppm; Praxair Distributions Inc), 12 analyses atmospheric CO2, and 240 seawater CO2 measurements in a 8.5 hour period. The atmospheric and seawater CO2 analyses were run in a sequence of 3 atmospheric measurements and 60 seawater measurements that was repeated 4 times between standardization. This project was supported by the Tula Foundation and Alaska Ocean Observing System, and was a collaborative effort between the Hakai Institute, University of Washington Joint Institute for the Study of the Atmosphere and Ocean/NOAA Pacific Marine Environmental Laboratory, State of Alaska Department of Transportation, University of Alaska Southeast Alaska Coastal Rainforest Center, and the Alaska Ocean Observing System.

Resources

8 resources available

Find Related Datasets

Search by Tags

Click any tag below to search for similar datasets

data.gov

An official website of the GSA's Technology Transformation Services

Looking for U.S. government information and services?
Visit USA.gov