Hydrogeologic Framework Data: Groundwater Monitoring Well Installation Data

The Wilcox Oil Company Superfund site (hereinafter referred to as “the site”) was formerly an oil refinery in northeast of Bristow in Creek County, Oklahoma. Historical refinery operations contaminated the soil, surface water, streambed sediments, alluvium, and groundwater with refined and stored products at the site. The Wilcox and Lorraine process areas are where the highest concentrations of volatile organic compounds, semivolatile organic compounds, polycyclic aromatic hydrocarbons, and trace elements (including metals) (collectively hereinafter referred to as “contaminants”) were measured in a local shallow perched groundwater system within the alluvium (hereinafter referred to as the “alluvial aquifer”) at the site during previous site assessments. In order to understand the potential migration of contaminants through the soil and groundwater in these areas, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, investigated aquifer characteristics of the alluvial aquifer in the Wilcox and Lorraine process areas of the site to (1) document hydraulic conductivity and other aquifer characteristics of the alluvial aquifer that govern contaminant fate and transport, (2) describe the geospatial extent and concentration of the contaminants in the alluvial aquifer in the Wilcox and Lorraine process areas, and (3) describe the geochemical controls pertaining to oxidation and reduction governing the fate and transport and the degradation potential of contaminants in the groundwater. This data release documents the data that were collected and briefly describes how they were used to characterize the hydrogeologic framework, groundwater-flow system, geochemistry, and aquifer hydraulic properties of the shallow groundwater system. Refer to the companion larger work citation (Teeple and others, 2025) for the complete description and data analyses. Twenty new groundwater monitoring wells were installed at the site by the U.S. Geological Survey in October 2022, to collect groundwater-level altitude measurements and groundwater-quality samples within the alluvial aquifer, thus supplementing the existing data from older groundwater monitoring wells and piezometers at the site. An electrical conductivity log and a soil core were collected at each location where a groundwater monitoring well was installed to better understand and correlate observations in the subsurface and more accurately determine contamination zones.

                                            [
  "010:12"
]
                                        

                                            {
  "fn": "Oklahoma-Texas Water Science Center Public Information Officer",
  "@type": "vcard:Contact",
  "hasEmail": "mailto:gs-w-txpublic-info@usgs.gov"
}
                                        

                                            [
  {
    "@type": "dcat:Distribution",
    "title": "Digital Data",
    "format": "XML",
    "accessURL": "https://doi.org/10.5066/P9FR2ZF6",
    "mediaType": "application/http",
    "description": "Landing page for access to the data"
  },
  {
    "@type": "dcat:Distribution",
    "title": "Original Metadata",
    "format": "XML",
    "mediaType": "text/xml",
    "description": "The metadata original format",
    "downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.67522522d34e5c4500cf4797.xml"
  }
]
                                        

                                            [
  "Bristow",
  "Creek County",
  "GPS measurement",
  "Oklahoma",
  "Superfund",
  "USGS:67522522d34e5c4500cf4797",
  "Wilcox Oil Company",
  "aquifer characterization",
  "benzene",
  "conceptual modeling",
  "electrical resistivity logging",
  "geologic contacts",
  "geophysics",
  "geoscientificInformation",
  "geospatial datasets",
  "hydrogeologic framework",
  "hydrogeology",
  "industrial pollution",
  "lithostratigraphy",
  "petroleum",
  "push coring",
  "scientific interpretation",
  "stratigraphic thickness",
  "unconsolidated deposits",
  "well installation"
]
                                        

                                            {
  "name": "U.S. Geological Survey",
  "@type": "org:Organization"
}
                                        

                                            [
  "geospatial"
]