AllCases_Final_Bed_Elevations: Model Sensitivity to Sediment Parameters and Bed Composition in Delft3D: Model Output
The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are included in this dataset. Model output from six cases (comprised of three sensitivity configurations and two simulation types (deterministic Delft3D, and probabilistic Delft3D mormerge) as forced by 9 climatological wave forcing conditions are included in this data release. All simulations were initialized using the same initial Digital Elevation Model (DEM) DEM with nearshore and island topopbathy dated 2015 (Passeri and others, 2018). Climatological forcing bins were built from a 1979-2020 reanalysis wave record as applied in Jenkins and others, 2020. For further information regarding model input generation, set up, and analysis, refer to Jenkins and others (2020) and Passeri and others (2018).
Find Related Datasets
Search by Tags
Click any tag below to search for similar datasets
Complete Metadata
| @type | dcat:Dataset |
|---|---|
| accessLevel | public |
| bureauCode |
[
"010:12"
]
|
| contactPoint |
{
"fn": "Robert L Jenkins",
"@type": "vcard:Contact",
"hasEmail": "mailto:rljenkins@usgs.gov"
}
|
| description | The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are included in this dataset. Model output from six cases (comprised of three sensitivity configurations and two simulation types (deterministic Delft3D, and probabilistic Delft3D mormerge) as forced by 9 climatological wave forcing conditions are included in this data release. All simulations were initialized using the same initial Digital Elevation Model (DEM) DEM with nearshore and island topopbathy dated 2015 (Passeri and others, 2018). Climatological forcing bins were built from a 1979-2020 reanalysis wave record as applied in Jenkins and others, 2020. For further information regarding model input generation, set up, and analysis, refer to Jenkins and others (2020) and Passeri and others (2018). |
| distribution |
[
{
"@type": "dcat:Distribution",
"title": "Digital Data",
"format": "XML",
"accessURL": "https://doi.org/10.5066/P13LISYW",
"mediaType": "application/http",
"description": "Landing page for access to the data"
},
{
"@type": "dcat:Distribution",
"title": "Original Metadata",
"format": "XML",
"mediaType": "text/xml",
"description": "The metadata original format",
"downloadURL": "https://data.usgs.gov/datacatalog/metadata/USGS.a6a7e8fc-2804-4416-b266-cbf45638e50f.xml"
}
]
|
| identifier | http://datainventory.doi.gov/id/dataset/USGS_a6a7e8fc-2804-4416-b266-cbf45638e50f |
| keyword |
[
"Bed Level Change",
"CMHRP",
"Coastal and Marine Hazards and Resources Program",
"Grand Bay",
"Gulf of Mexico",
"SPCMSC",
"Sediment Flux",
"Sediment Parameter",
"Shorelines",
"St. Petersburg Coastal and Marine Science Center",
"State of Alabama",
"State of Mississippi",
"U.S. Geological Survey",
"USGS",
"USGS:a6a7e8fc-2804-4416-b266-cbf45638e50f",
"Waves",
"coastal processes",
"digital elevation models",
"elevation",
"environment",
"estuarine processes",
"geoscientificInformation",
"hydrodynamics",
"modeling",
"oceans",
"remediation",
"sea-level change",
"sediment transport",
"structure",
"tides (oceanic)"
]
|
| modified | 2024-10-31T00:00:00Z |
| publisher |
{
"name": "U.S. Geological Survey",
"@type": "org:Organization"
}
|
| spatial | -88.4500, 29.9900, -87.6600, 30.7600 |
| theme |
[
"geospatial"
]
|
| title | AllCases_Final_Bed_Elevations: Model Sensitivity to Sediment Parameters and Bed Composition in Delft3D: Model Output |
