-
Federal
MODFLOW models for the simulation of groundwater-flow dynamics in the U.S. Northern High Plains driven by multi-model estimates of surficial aquifer recharge.
Department of the Interior —
There is a growing interest in incorporating higher-resolution groundwater modeling within the framework of large-scale land surface models (LSMs), including new... -
Federal
MODFLOW-USG model used to evaluate water management issues in the Los Angeles Coastal Plain, California
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Water Replenishment District of Southern California, developed a regional groundwater model of the Los... -
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW-2005 files for numerical model simulations of potential changes in water levels and capture of natural discharge from groundwater withdrawals in Snake Valley and adjacent areas, Utah and Nevada
Department of the Interior —
A previously developed numerical groundwater flow model of the eastern Great Basin was used to investigate where potential drawdown and capture of natural discharge... -
Federal
MODFLOW 6 and MODPATH 7 model data sets used for the update of the groundwater-flow model for the Great Miami Buried Valley Aquifer in the vicinity of Wright-Patterson Air Force Base near Dayton, Ohio
Department of the Interior —
A previously constructed numerical model (https://pubs.usgs.gov/pp/2007/1737a/) simulating the regional groundwater-flow system in the vicinity of the Wright-... -
Federal
MODFLOW 2005 and MODPATH 5 model data sets used to evaluate seepage-meter efficiency in high-permeability settings
Department of the Interior —
A three-dimensional finite-difference model, MODFLOW-2005 (version 1.12.00), was developed to better understand how Seepage Meter efficiency changes when installed in... -
Federal
EnviroAtlas - Water Balance and Surficial Groundwater by 12-digit HUC for the Conterminous United States
U.S. Environmental Protection Agency —
This EnviroAtlas dataset summarizes several U.S. Geological Survey (USGS) water budget and surficial groundwater datasets by 12-digit HUC. It includes average rates... -
Federal
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data used to simulate groundwater flow and tritium transport from the HANDLEY underground nuclear test, Pahute Mesa, southern Nevada
Department of the Interior —
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and... -
Federal
MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam
Department of the Interior —
A proof-of-concept MODFLOW 6 groundwater model was developed to represent the bedrock, delta, and alluvially-deposited aquifers underlying the Mekong River Basin... -
Federal
Categories used to classify the basin-fill deposits in the Central Valley
Department of the Interior —
This digital dataset contains the categories used to classify the basin-fill deposits in the Central Valley as either coarse-grained or fine-grained deposits. This... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
Groundwater flow and SNTEMP stream temperature historical model (2019-2023)
Department of the Interior —
A historical conditions MODFLOW6 and SNTEMP model was developed to simulate groundwater flows and instream temperatures in Beaver Creek, Alaska during the study... -
Federal
MODFLOW-2005 model used to Simulate the Evolution of Fluid Underpressures in the Great Plains, by Incorporation of Tectonic Uplift and Tilting
Department of the Interior —
A sequence of nine two-dimensional cross-sectional groundwater models using MODFLOW-2005 was created to study whether underpressures (subhydrostatic heads) in the... -
Federal
Discharge areas for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents discharge areas in the Death Valley regional ground-water flow system (DVRFS) transient model. Natural ground-water discharge occurs... -
Federal
MODFLOW-NWT and MODPATH models, capture zones and uncertainty analysis for the Partridge River Basin, Minnesota
Department of the Interior —
A MODFLOW-NWT model was used to simulate the groundwater/surface-water interactions in the Partridge River Basin, MN using the Streamflow Routing and Unsaturated Zone... -
Federal
MODFLOW-2005 and MODPATH6 models used to simulate groundwater flow and transport and base-flow age in two tributaries to the Upper Chester River, Maryland
Department of the Interior —
A steady state three-dimensional groundwater flow (MODFLOW-2005) and advective transport (MODPATH6) model was developed to examine subsurface travel times to wells... -
Federal
MODFLOW-2005 Groundwater Flow Model to Simulate Predevelopment Groundwater Flow in the Eastern Abu Dhabi Emirate, United Arab Emirates
Department of the Interior —
A numerical groundwater flow model using MODFLOW-2005 was developed to examine predevelopment groundwater flow in eastern Abu Dhabi Emirate, United Arab Emirates. The... -
Federal
MODFLOW-NWT groundwater model used for simulating potential future pumping scenarios and forecasting associated groundwater-level changes in the Truxton aquifer on the Hualapai Reservation and adjacent areas, Mohave County, Arizona
Department of the Interior —
A three-dimensional, numerical groundwater flow model of the Hualapai Plateau and Truxton Basin was developed to assist water-resource managers in understanding the... -
Federal
MODFLOW-NWT groundwater model demonstrating groundwater model calibration with repeat microgravity measurements
Department of the Interior —
A numerical model was developed using MODFLOW-NWT and FloPy to simulate groundwater flow and demonstrate a practical method for incorporating repeat microgravity...