-
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Forecasting demand data for critical materials
National Institute of Standards and Technology —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Forecasting demand data for critical materials
Department of Commerce —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
Hardware-in-the-loop Laboratory Performance Verification of Flexible Building Equipment in a Typical Commercial Building: Performance of Heating, Ventilation, and Air Conditioning and Thermal Energy Storage Across the United States
Department of Commerce —
This high-fidelity dataset measures the holistic load flexibility performance of a suite of commonly used commercial building heating, ventilating, and air-... -
Federal
n-Decylcyclohexane: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
Department of Commerce —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
Data for figures in the AMTA 2023 conference paper titled "NIST Antenna Gain and Polarization Calibration Service Reinstatement"
Department of Commerce —
After a five-year renovation of the National Institute of Standards and Technology (NIST) Boulder, CO, antenna measurement facility, the Antenna On-Axis Gain and... -
Federal
Generator Fleet Characteristics Model
Department of Commerce —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
Department of Commerce —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Biphenyl: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data from "High-temperature tensile constitutive data and models for structural steels in fire (NIST Technical Note 1714)"
Department of Commerce —
The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered... -
Federal
Additive Manufacturing Benchmark Test Series (AM-Bench) 2018 Test Descriptions
National Institute of Standards and Technology —
The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series,... -
Federal
Electromagnetic Interference Measurements from Tungsten Inert Gas (TIG) Arc Welding
Department of Commerce —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and...