-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Phenylcyclohexane: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Theory aware Machine Learning (TaML)
National Institute of Standards and Technology —
A code repository and accompanying data for incorporating imperfect theory into machine learning for improved prediction and explainability. Specifically, it focuses... -
Federal
Validation Data and Control Software for ATIC: Automated Testbed for Interference Testing in Communication Systems
National Institute of Standards and Technology —
Validation data and software for the paper, "ATIC: Automated Testbed for Interference Testing in Communication Systems," to appear in Proceedings of 2023 IEEE... -
Federal
Nanoindentation study on the phase transformation of single crystal silicon of different crystallographic orientations using a spherical indenter probe
National Institute of Standards and Technology —
The effect of the crystallographic orientation on the primary and secondary phase transformations of single-crystal silicon (Si) during indentation was investigated... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
In-situ Raman spectra of indented fused silica
Department of Commerce —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
National Institute of Standards and Technology —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and... -
Federal
Activation loop plasticity and active site coupling in the MAP kinase, ERK2: Supplementary Data, Trajectories, and Scripts
National Institute of Standards and Technology —
Conventional molecular dynamics (MD) simulations using the GPU-enabled CUDA version of the pmemd executable (pmemd.cuda) in AMBER were applied to explore the... -
Federal
Smartphone Data for Development of Indoor Localization Apps
Department of Commerce —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a...