148 datasets found
-
Federal
MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam
Department of the Interior —
A proof-of-concept MODFLOW 6 groundwater model was developed to represent the bedrock, delta, and alluvially-deposited aquifers underlying the Mekong River Basin... -
Federal
GSFLOW model of the upper Deschutes Basin, Oregon
Department of the Interior —
A three-dimensional integrated groundwater/surface-water model was developed for the upper Deschutes Basin in central Oregon to better understand groundwater and... -
Federal
MODFLOW-NWT groundwater model demonstrating groundwater model calibration with repeat microgravity measurements
Department of the Interior —
A numerical model was developed using MODFLOW-NWT and FloPy to simulate groundwater flow and demonstrate a practical method for incorporating repeat microgravity... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
MODFLOW-NWT and MODPATH6 model use to analyze remedial scenarios affecting plume movement through a sole-source aquifer system, southeastern Nassau County, New York
Department of the Interior —
A three-dimensional steady-state groundwater flow model is coupled with the particle-tracking program, MODPATH, to assess the fate and transport of volatile organic... -
Federal
VS2DI model used to evaluate groundwater connectivity of wetlands in the Prairie Pothole Region, North Dakota
Department of the Interior —
A two-dimensional, groundwater flow model (VS2DI) was developed to examine groundwater flow near wetlands in the Prairie Pothole Region of North Dakota. Four model... -
Federal
MODFLOW-2000 model used to evaluate potential effects of existing and proposed groundwater withdrawals on water levels and natural groundwater discharge in Snake Valley and surrounding areas, Utah and Nevada
Department of the Interior —
A previously developed three-dimensional steady-state numerical groundwater-flow model was modified to transient conditions with respect to well withdrawals, and used... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
SUTRA model simulations used to evaluate heat flow from microbial activity at a crude oil-contaminated site.
Department of the Interior —
A steady-state, two-dimensional, heat transport model was created using SUTRA, version 2.2, modified to allow for spatially-variable thermal properties and density... -
Federal
GFLOW model files used to generate probabilistic waste-water plume extents and contributing areas to supply wells for a proposed waste-water infiltration lagoon scenario, Lac du Flambeau, Wisconsin.
Department of the Interior —
This data release contains files for three scenarios of an analytic element (GFLOW) groundwater flow model with particle-tracking that were developed in cooperation... -
Federal
MODFLOW-NWT model of a hypothetical stream-aquifer system to assess capture map bias
Department of the Interior —
A MODFLOW-NWT (version 1.0.9) model of a hypothetical stream-aquifer system is presented for the evaluation and characterization of capture map bias. The hypothetical... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in the Salt Fork Red River aquifer, southwestern Oklahoma, 1980-2015
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, constructed a finite-difference numerical groundwater-flow model of the Salt Fork... -
Federal
MODFLOW-NWT model of the glacial aquifer system north of Aberdeen, South Dakota, through water year 2015
Department of the Interior —
A previously developed three-dimensional groundwater flow model (https://doi.org/10.3133/sir20125183) of the three primary aquifers in the region north of Aberdeen,... -
Federal
MODPATH particle-tracking analysis of groundwater flow and travel times to the Barnegat Bay-Little Egg Harbor estuary and streams within the Barnegat Bay-Little Egg Harbor watershed, New Jersey
Department of the Interior —
A groundwater-flow model that was previously developed by the U. S. Geological Survey of Ocean County, N.J. (https://doi.org/10.3133/sir20165035) was used in an... -
Federal
SEAWAT Model of Flow and Chloride Transport in the 1,500-Foot, 2,400-Foot, and 2,800-Foot Sands of the Baton Rouge Area, Louisiana
Department of the Interior —
An updated three-dimensional, groundwater-flow and chloride-transport model (SEAWAT) of the Southern Hills regional aquifer system in southeastern Louisiana and... -
Federal
MODFLOW-NWT data sets for simulation of Effects of Surface-Water and Groundwater Inflows and Outflows on the Hydrology of the Tsala Apopka Lake Basin in Citrus County, Florida
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Southwest Florida Water Management District, calibrated a model to quantify the inflows and outflows in the Floral... -
Federal
MODFLOW-2005 with SWI2 used to evaluate the water-table response to sea-level rise and change in recharge, Sandy Hook Unit, Gateway National Recreation Area, New Jersey
Department of the Interior —
A MODFLOW-2005 model, using the SWI2 package, was developed for the Sandy Hook Unit, Gateway National Recreation Area (hereafter Sandy Hook) in New Jersey to evaluate... -
Federal
MODFLOW-NWT model used to evaluate the groundwater availability of the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho
Department of the Interior —
A three-dimensional groundwater flow model (MODFLOW-NWT) of the Columbia Plateau Regional aquifer (CPRAS) in Washington, Oregon, and Idaho was developed to provide an... -
Federal
MODFLOW-NWT and MT3D-USGS models for evaluating heat flows, lags and dampening under high emission climate forcing for unsaturated/saturated transport in a synthetic watershed
Department of the Interior —
A 3-dimensional (3D) synthetic model, built for running with MODFLOW-NWT and MT3D-USGS, explores the new unsaturated zone heat transport capabilities in MT3D-USGS.... -
Federal
MODFLOW-NWT model used to assess groundwater availability in the uppermost principal aquifer systems of the Williston structural basin, United States and Canada
Department of the Interior —
A three-dimensional groundwater flow model was developed to characterize groundwater resources the uppermost principal aquifers in the Williston structural basin in...
148 datasets found