-
Federal
Simulated potentiometric surface contours at end of simulation (1998) in model layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These contours represent the simulated potentiometric surface at the end of simulation (1998) in model layer 1 of the Death Valley regional ground-water flow system... -
Federal
Horizontal flow barriers for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset defines the surface traces of regional features simulated as horizontal flow barriers in the Death Valley regional ground-water flow system... -
Federal
SEAWAT, MODFLOW-2000, and SHARP models used to simulate potential water-allocation changes, Cape May County, New Jersey
Department of the Interior —
Three existing groundwater flow models, using MODFLOW-2000, SEAWAT, and SHARP model codes, were used by the U.S. Geological Survey (USGS) to determine the effects of... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 1 of the Death Valley regional ground-water flow... -
Federal
Simulated constant-head boundary for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents the constant head-boundary used to simulate ground-water inflow or outflow at the lateral boundary of the Death Valley regional... -
Federal
Material-property zones used in the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Zones in this data set represent spatially contiguous areas that influence ground-water flow in the Death Valley regional ground-water flow system (DVRFS), an... -
Federal
Model grid and infiltration values for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the model grid and infiltration values simulated in the transient ground-water flow model of the Death Valley regional ground-water flow... -
Federal
Initial hydraulic heads for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the hydraulic-head values in 16 model layers used to initiate the transient simulation of the Death Valley regional ground-water flow... -
Federal
Locations, values, and uncertainties of hydraulic-head observations for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set contains the locations, values, and uncertainties of hydraulic-head observations used in the calibration of the transient model of... -
Federal
Thicknesses of hydrogeologic units used in the hydrogeologic framework and transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
A digital three-dimensional hydrogeologic framework model (HFM) represents the geometry and extent of hydrogeologic units (HGUs) and major structures in the Death... -
Federal
Locations, values, and uncertainties of hydraulic-head observations for the steady-state, prepumped period of the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set contains the locations, values, and uncertainties of 700 hydraulic-head observations used in the steady-state, prepumped period of... -
Federal
MODFLOW-2000 and MODPATH model data sets used in scenarios of groundwater flow and pumping (1900-2500) near Mount Pleasant, South Carolina
Department of the Interior —
An existing three-dimensional model (MODFLOW-2000) by Fine, Petkewich, and Campbell (2017) (https://doi.org/10.3133/sir20175128) was used to evaluate 7 water-... -
Federal
MODFLOW-2000 and MODPATH used to evaluate groundwater flow and selected groundwater-management scenarios in the Brunswick area, Georgia, 2004-2015
Department of the Interior —
A previously published groundwater flow model (https://pubs.usgs.gov/sir/2005/5089/) was revised with refined grid spacing and updated hydrogeolgic framework and... -
Federal
MODFLOW-2000 model used to illustrate the differences in flow paths and travel times when three-dimensional kriging is used to estimate the hydraulic conductivity distribution as compared to manual determinations of hydraulic conductivity distribution
Department of the Interior —
A three-dimensional (3D) groundwater flow model of the glaciated sediments around Elkhart, Indiana was constructed as part of the U.S. Geological Survey Groundwater... -
Federal
MODFLOW-2000 model used in the simulation of reclaimed-water injection and pumping scenarios and particle-tracking analysis near Mount Pleasant, South Carolina: U.S. Geological Survey data release
Department of the Interior —
An existing three-dimensional model (MODFLOW-2000) by Petkewich and Campbell (2007) was updated to simulate potential changes in groundwater flow and groundwater-... -
Federal
MODFLOW-2000 model data sets used in the simulation of Groundwater Flow and Pumping Scenarios for 1900-2050 near Mount Pleasant, South Carolina
Department of the Interior —
An existing three-dimensional model (MODFLOW-2000) by Petkewich and Campbell (2007) (https://pubs.usgs.gov/sir/2007/5126/) was updated to simulate six predictive... -
Federal
MODFLOW-2000 model used to evaluate the effects of possible changes in water-supply withdrawals from, and effluent recharge to, the Kirkwood-Cohansey aquifer system, Winslow Township, Camden County, New Jersey
Department of the Interior —
A previously developed groundwater-flow model of the Great Egg Harbor and Mullica River Basins, N.J. (https://doi.org/10.3133/sir20125187) by the U.S. Geological... -
Federal
Locations, values, and uncertainties of hydraulic-head observations for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set contains the locations, values, and uncertainties of hydraulic-head observations used in the calibration of the transient model of... -
Federal
Horizontal flow barriers for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset defines the surface traces of regional features simulated as horizontal flow barriers in the Death Valley regional ground-water flow system... -
Federal
MODFLOW-2000 models used for groundwater simulation and management models for the Upper Klamath Basin, Oregon and California
Department of the Interior —
This data release contains a three-dimensional groundwater flow model with example applications using MODFLOW-2000. The calibrated model is able to simulate observed...