48 datasets found
-
Federal
Next Generation RivGen Power System: Feasibility Assessment of Hydroacoutics Data for Development of a Probability of Encounter Model of Salmon Smolts
Department of Energy —
This document contains a feasibility assessment for salmon smolt characterization and analysis based on existing hydroacoustics data and probability of encounter model. -
Federal
Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study
Department of Energy —
The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial... -
Federal
Deep Direct-Use Feasibility Study Energy Demand Characterization and Surface Plant Modeling for West Virginia University
Department of Energy —
This dataset provides information gathered to determine end use load and assessment of existing district heating systems (DHS). It also provides Aspen simulation... -
Federal
Salton Sea Geothermal Development - Nontechnical Barriers to Entry - Analysis and Perspectives
Department of Energy —
The report included in this submission details the nontechnical barriers to entry for development of geothermal resources in the Salton Sea. The Salton Sea provides... -
Federal
Model results and data for Nontechnical Barriers to Geothermal Development
Department of Energy —
Data included in this submission support the analysis conducted for the report "Nontechnical Barriers to Geothermal Development" which is linked bellow. These data... -
Federal
Calculation Tool for Transported Geothermal Energy Using Two-Step Absorption Process
Department of Energy —
This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature... -
Federal
Ground Source Heat Pump Screening Tool and Related Resources
Department of Energy —
This archive contains both a link to Oak Ridge National Laboratory's Ground Source Heat Pump (GSHP) Screening Tool and related resources documenting its development,... -
Federal
Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)
Department of Energy —
Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: - Develop a multistage hydraulic stimulation approach... -
Federal
Dataset for report: Non-Technical Barriers to Geothermal Development in California and Nevada
Department of Energy —
In California and Nevada, geothermal projects are subject to non-technical barriers, which may create development delays leading to higher project costs and risks and... -
Federal
Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory
Department of Energy —
The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the... -
Federal
GEOPHIRES files for DDU techno-economic simulations
Department of Energy —
During 2017-2019, the U.S. Department of Energy funded six geothermal deep direct-use (DDU) projects to investigate feasibility of DDU for heating, cooling and... -
Federal
Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West Virginia University
Department of Energy —
This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid... -
Federal
Deep Direct-Use Feasibility Study Estimation of Reservoir Properties for the Tuscarora Sandstone
Department of Energy —
This dataset contains black-and-white photographic images of individual core segments from well Preston 119 and photomicrographs taken of petrographic thin sections... -
Federal
Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site - Workshop Presentation
Department of Energy —
This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The... -
Federal
Utah FORGE: Phase 2C Topical Report
Department of Energy —
This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview;... -
Federal
Development of 3D Geological Model of Tuscarora Sandstone for Feasibility of Deep Direct-Use Geothermal at West Virginia University Main Campus
Department of Energy —
The subsurface uncertainty at West Virginia University Main Campus is dominated by the uncertainty in the projections of geofluid flowrate in the target formation,... -
Federal
Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University
Department of Energy —
To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown... -
Federal
Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study
Department of Energy —
The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial... -
Federal
Resource Analysis for Deep Direct-Use Feasibility Study in East Texas
Department of Energy —
The National Renewable Energy Laboratory, Southern Methodist University Geothermal Laboratory, Eastman Chemical, Turbine Air Systems, and the Electric Power Research...
48 datasets found