-
Federal
Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model
Department of Energy —
This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah... -
Federal
Utah FORGE: Seismic and Other Shapefiles from the Roosevelt Hot Springs Area
Department of Energy —
Three shapefiles in this submission show the position of proposed seismic line surveys. The mid-crustal velocity anomaly file shows the extent of an anomalously low... -
Federal
Utah FORGE: TEM and Gravity Data
Department of Energy —
This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains... -
Federal
Utah FORGE: Geology Map and GIS Data
Department of Energy —
This archive contains a geology map of the general Roosevelt Hot Springs region, both in PDF and ArcGIS geodatabase formats, that was created as part of the Utah... -
Federal
Utah FORGE: Area Terrain Slope Data
Department of Energy —
This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR... -
Federal
Utah FORGE: Temperature Contours at 200 m
Department of Energy —
The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area.... -
Federal
Utah FORGE: Milford Gravity Data Shapefile
Department of Energy —
This is a zipped GIS compatible shapefile of gravity data points used in the Milford, Utah FORGE project as of March 21st, 2016. The shapefile is native to ArcGIS,... -
Federal
Utah FORGE: Area 0.5 m LiDAR Data
Department of Energy —
During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for... -
Federal
Utah FORGE: Updated Phase 2C Well Location Coordinates
Department of Energy —
Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first...