-
Federal
DASH Slow Strain Rates from Brady Hot Springs Geothermal Field during PoroTomo Deployment Period
Department of Energy —
This submission contains slow strain rates summed to radians over 30 second intervals [rad/s] derived from horizontal distributed acoustic sensing measurements (DASH)... -
Federal
Research Report of Low Temperature Geothermal Play Fairway Analysis for the Appalachian Basin
Department of Energy —
This is a final report summarizing a one-year (2014-15) DOE funded Geothermal Play Fairway Analysis of the Low-Temperature resources of the Appalachian Basin of New... -
Federal
Utah FORGE 2439: A Multi-Component Approach to Characterizing In-Situ Stress
Department of Energy —
Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using... -
Federal
WaterTAP-REFLO Simulations of Solar Energy Integrated Desalination Systems for KBHDP and Permian Basin Case Studies
Department of Energy —
This submission includes model simulations for several solar-integrated desalination water treatment systems. The simulations revolve around two different case... -
Federal
Utah FORGE: Microseismic Event Catalogues from the Well 16A(78)-32 Stimulation in April, 2022
Department of Energy —
This dataset includes three microseismic event catalogues from the three stages of stimulation in April 2022 of well 16A(78)-32 derived by Geo Energie Suisse. Each... -
Federal
Oahu Solar Measurement Grid (1-Year Archive): 1-Second Solar Irradiance; Oahu, Hawaii (Data)
Department of Energy —
Seventeen measurement stations in the south western region of the island of Oahu collected data at 1-second intervals over the course of a year. The sensors are... -
Federal
NWTC Ceilometer (1) Pre-campaign / Derived Data
Department of Energy —
Overview This instrument will be testing the data transfer process before deploying the campaign. The netCDF L3 data file has level 3 (L3) data that have gone through... -
Federal
Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32
Department of Energy —
This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-... -
Federal
Wind Turbine Structure Setbacks: Ordinances (2022) and Extrapolated Trends, 115 Hub Height 170 Rotor Diameter
Department of Energy —
This dataset represents wind energy setback requirements from structures based on existing county ordinances as of April 2022. A setback requirement is a minimum... -
Federal
PoroTomo - Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1
Department of Energy —
This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment... -
Federal
July 2014 Dixie Valley Binary Costs
Department of Energy —
Dixie Valley Binary Costs reports. Includes cost and man-hour data supporting the technical and economic feasibility of utilizing the available unused heat to... -
Federal
Air Leakage and Air Transfer Between Garage and Living Space
Department of Energy —
This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production... -
Federal
Utah FORGE 2-2439v2: A Multi-Component Approach to Characterizing In-Situ Stress - 2025 Workshop Presentation
Department of Energy —
This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement... -
Federal
Wind and Structural Loads on Parabolic Trough Solar Collectors at Nevada Solar One
Department of Energy —
Wind loading is a main contributor to structural design costs of Concentrating Solar Power (CSP) collectors, such as heliostats and parabolic troughs. These... -
Federal
Improved Microseismicity Detection During Newberry EGS Stimulations
Department of Energy —
Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key... -
Federal
Utah FORGE: GeoThermOPTIMAL Presentation Video
Department of Energy —
This is a project description video by Dr. William W. Fleckenstein related to their "Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal... -
Federal
EGS Collab Experiment 1: In-situ observation of pre-, co- and post-seismic shear slip preceding hydraulic fracturing
Department of Energy —
Understanding the initiation and arrest of earthquakes is one of the long-standing challenges of seismology. Here we report on direct observations of borehole... -
Federal
Surface Meteorological Station - ANL 50m, Sonic, Physics site-12 - Raw Data
Department of Energy —
Overview Measurements of surface sensible heat flux, momentum flux, wind components, and virtual temperature. Data Details * X (column 1) is a component of wind cm/s... -
Federal
Surface Meteorological Station - PNNL 10m Sonic, Physics site-4 - Raw Data
Department of Energy —
Overview This dataset provides fast response wind and virtual sonic temperature data. Data Details Each meteorological (met) station has one sonic anemometer (Gill... -
Federal
Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado
Department of Energy —
This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be...