-
Federal
Practices Maintain Straight Hole in Crooked Hole Conditions, While Also Enabling Significant Gains in Drill Rate
Department of Energy —
Bottom hole assembly (BHA) designs were assessed in field trials for their ability to achieve critical low inclination requirements, while simultaneously enabling... -
Federal
Fallon FORGE: Seismic Reflection Profiles
Department of Energy —
Fourteen seismic reflection profiles and their interpretations for the southern Carson Sink within and proximal to the proposed Fallon FORGE site. Five profiles were... -
Federal
Fallon FORGE: Geodetic Data
Department of Energy —
Fallon FORGE InSAR and geodetic GPS deformation data. InSAR shapefiles are packaged together as .MPK (ArcMap map package, compatible with other GIS platforms), and as... -
Federal
Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC
Department of Energy —
This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed... -
Federal
West Flank Coso FORGE: 33A-7 Image and Mud Log Data
Department of Energy —
Circumferential Borehole Imaging Log (CBIL) image log as DLIS file, and PDF mud log of well 33A-7 as part of the West Flank Coso, CA FORGE site. -
Federal
Lost Circulation Materials in Geothermal Drilling: Thermal Degradation, Viscosity, Compression, and Flow Loop Tests
Department of Energy —
This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results... -
Federal
Fallon FORGE: 3D Geologic Model
Department of Energy —
The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie... -
Federal
TEAMER: Modeling, Optimization, and Design Data for a Bio-Inspired Wave Energy Converter
Department of Energy —
This dataset contains modeling files, computational results, and analysis reports from work focused on the initial optimization and design of a bio-inspired Wave... -
Federal
FOSWEC v2: System identification and control testing at Hinsdale Wave Research Laboratory
Department of Energy —
This report summarizes the design and execution of a wave tank test of the floating oscillating surge wave energy converter (FOSWEC) in the O.H. Hinsdale Wave... -
Federal
MBARI WEC 2021 deployment
Department of Energy —
This dataset includes data from the Monterey Bay Aquarium Research Institute (MBARI) wave energy converter (WEC) and a nearby located Sofar Spotter buoy. The Monterey... -
Federal
Fallon FORGE: Gravity and Magnetics Data
Department of Energy —
This package contains principal facts for new gravity data collected September - November 2017 in support of the Fallon FORGE project. Also included are rock core... -
Federal
Test Report for Detonation Velocity Measurements
Department of Energy —
Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG)... -
Federal
McGinness Hills Well 27A-10 Daily Drilling Report Data
Department of Energy —
This data should be used with the daily drilling record and other data which can be obtained from the contact listed below. -
Federal
High-Pressure Combustion and Deflagration-to-Detonation Transition in Ethylene/Nitrous Oxide Mixtures
Department of Energy —
In this paper, the combustion of nitrous oxide with a simple hydrocarbon, ethylene, at high initial pressures is investigated. A series of experiments were conducted... -
Federal
Reference Model 2 Cost Breakdown (RM2: River Current Turbine)
Department of Energy —
Contains the Reference Model 2 (RM2) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM2 device... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry... -
Federal
TEAMER: Numerical Modeling of WECs to Support OES Task 10
Department of Energy —
This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions)... -
Federal
Auto Indexer Auto-Indexer for Percussive Hammers: Vane Motor Dynamometer Testing
Department of Energy —
Objectives Options associated with geothermal drilling operations are generally limited by factors such as formation temperature and rock strength. The objective of... -
Federal
Advanced Geothermal Drilling and Logging Technologies
Department of Energy —
The objective of advanced drilling and logging technologies is to promote ways and means to reduce the cost of geothermal drilling through an integrated effort which... -
Federal
Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy
Department of Energy —
Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during...