-
Federal
X-ray computed tomography data of Additive Manufacturing Metrology Testbed (AMMT) parts: Overhang Part X4
Department of Commerce —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" in-situ... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Data associated with "Frequency-doubled chirped-pulse dual-comb generation in the near-UV: Combined vs separated beam investigations of Rb atoms near 420 nm" accepted for publication in Scientific Reports (2025).
Department of Commerce —
Data associated with "Frequency-doubled chirped-pulse dual-comb generation in the near-UV: Combined vs separated beam investigations of Rb atoms near 420 nm" accepted... -
Federal
Characterization of zinc carboxylates in an oil paint test panel [dataset]
Department of Commerce —
This dataset contains X-ray EDS (energy dispersive spectroscopy), FTIR (Fourier transform infrared spectroscopy), and DART-MS (Direct analysis in real time mass... -
Federal
Forecasting demand data for critical materials
Department of Commerce —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05)
Department of Commerce —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
Results of flow-FISH for RNA degradation
Department of Commerce —
Flow cytometry measurements of FISH-labeled RNA at timepoints following rifampicin addition. These data folders contain raw data (.fcs files), analysis files, and... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
Department of Commerce —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Genome In A Bottle - v3.0 Genome Stratifications
Department of Commerce —
These v3.0 stratification BED files from the Global Alliance for Genomic Health (GA4GH) Benchmarking Team, the Genome in a Bottle Consortium and the Telomere-to-... -
Federal
Challenging Medically-Relevant Genes Benchmark Set
Department of Commerce —
CMRG v1.00 of a small variant benchmark and structural variant benchmark focused on 273 challenging medically relevant genes for the Genome in a Bottle (GIAB) sample... -
Federal
Measuring Microbial Community-Wide Antibiotic Resistance Propagation via Natural Transformation in the Human Gut Microbiome
Department of Commerce —
This repository includes the raw data, analysis code, and results of a systematic analysis of natural transformation (i.e., horizontal gene transfer; HGT) of bacteria... -
Federal
Supporting Data for "Selective deuteration along a polyethylene chain: Differentiating conformation segment by segment"
Department of Commerce —
Includes raw data used to generate the figures in the publication "Selective deuteration along a polyethylene chain: Differentiating conformation segment by segment"... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
Department of Commerce —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
A Practical Approach to Placing Coastal Sensors for Spectrum Sharing in the 3.5 GHz Band
Department of Commerce —
This dataset contains the results of simulated deployments of Environmental Sensing Capability (ESC) sensors along the coasts of the contiguous United States in the... -
Federal
LAMMPS Simulation Data of Alchemical Processes
Department of Commerce —
This data includes a four alchemical processes with data files generated with the python package: generate_alchemical_lammps (DOI from MIDAS) and the resulting output... -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
Department of Commerce —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
Department of Commerce —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
ProSAS: An O-RAN Approach to Spectrum Sharing between NR and LTE
Department of Commerce —
The dataset corresponds to the findings detailed in the paper titled "ProSAS: An O-RAN Approach to Spectrum Sharing between NR and LTE," to be included in the...