-
Federal
MODFLOW-NWT and MT3D-USGS models for appraising parameter sensitivity and other controlling factors in a synthetic watershed accounting for variably-saturated flow processes
Department of the Interior —
A 3-dimensional (3D) synthetic model, using MODFLOW-NWT and MT3D-USGS, explores the new unsaturated zone heat transport capabilities in MT3D-USGS. Model simulations... -
Federal
SFR Inflow Table for the Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and Northern Chihuahua, Mexico
Department of the Interior —
This tabular dataset represents monthly flow at 18 surface-water inflow points used as input into the Streamflow-Routing (SFR) Package for MODFLOW-One-Water... -
Federal
Evapotranspiration Input Data for the Central Valley Hydrologic Model (CVHM)
Department of the Interior —
This digital dataset contains monthly reference evapotranspiration (ETo) data for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an... -
Federal
Material-property zones used in the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Zones in this data set represent spatially contiguous areas that influence ground-water flow in the Death Valley regional ground-water flow system (DVRFS), an... -
Federal
Critical head, thickness of fine-grained deposit, and skeletal elastic storage arrays of the SUB package of the Central Valley Hydrologic Model
Department of the Interior —
This digital dataset defines the SUB package arrays for the model grid, critical head, thickness of fine-grained deposits, and skeletal-elastic-storage used in the... -
Federal
MODFLOW 6 Model Used to Simulate Groundwater Flow in the Long Island, New York Regional Aquifer System for 1900–2019 Pumping and Recharge Conditions
Department of the Interior —
This groundwater model archive documents a transient, regional-scale numerical model of the Long Island aquifer system that simulates hydrologic conditions for the... -
Federal
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data used to simulate groundwater flow and tritium transport from the HANDLEY underground nuclear test, Pahute Mesa, southern Nevada
Department of the Interior —
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and... -
Federal
MODFLOW 6 model used to simulate groundwater flow in the Harney Basin, southeastern Oregon (ver. 2.0, May 2024)
Department of the Interior —
A three-dimensional groundwater flow model, MODFLOW 6, was developed to provide a better understanding of the hydrogeology of the Harney Basin, southeastern Oregon.... -
Federal
Net infiltration of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Recharge in the Death Valley regional ground-water flow system (DVRFS) was estimated from net infiltration simulated by Hevesi and others (2003) using a deterministic... -
Federal
Data tables of well locations, perforated intervals, and time series of hydraulic-head observations for the Central Valley Hydrologic Model (CVHM)
Department of the Interior —
This digital dataset defines the well locations, perforated intervals, and time series of hydraulic-head observations used in the calibration of the transient... -
Federal
MODFLOW-NWT groundwater model used for simulating potential future pumping scenarios and forecasting associated groundwater-level changes in the Truxton aquifer on the Hualapai Reservation and adjacent areas, Mohave County, Arizona
Department of the Interior —
A three-dimensional, numerical groundwater flow model of the Hualapai Plateau and Truxton Basin was developed to assist water-resource managers in understanding the... -
Federal
Probability distribution grids of dissolved oxygen and dissolved manganese concentrations at selected thresholds in drinking water depth zones, Central Valley, California
Department of the Interior —
The ascii grids represent regional probabilities that groundwater in a particular location will have dissolved oxygen (DO) concentrations less than selected threshold... -
Federal
MODFLOW grid for simulations used to evaluate the potential effect of Lower Floridan aquifer groundwater pumpage on the Upper Floridan aquifer at Barbour Pointe community in Chatham County, Georgia
Department of the Interior —
A revised regional groundwater-flow model using a modified grid in conjunction with USGS MODFLOW-2000 was developed to the predict the effects of Lower Floridan... -
Federal
Discharge areas for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents discharge areas in the Death Valley regional ground-water flow system (DVRFS) transient model. Natural ground-water discharge occurs... -
Federal
MODFLOW-NWT and MODPATH models, capture zones and uncertainty analysis for the Partridge River Basin, Minnesota
Department of the Interior —
A MODFLOW-NWT model was used to simulate the groundwater/surface-water interactions in the Partridge River Basin, MN using the Streamflow Routing and Unsaturated Zone... -
Federal
MODFLOW-2005 and MODPATH6 models used to simulate groundwater flow and transport and base-flow age in two tributaries to the Upper Chester River, Maryland
Department of the Interior —
A steady state three-dimensional groundwater flow (MODFLOW-2005) and advective transport (MODPATH6) model was developed to examine subsurface travel times to wells... -
Federal
MODFLOW-NWT, MODPATH, and MT3DMS models used to study of hypothetical horizontal water-supply well design for New Hampshire and surrounding regions: U.S. Geological Survey data release
Department of the Interior —
A series of three-dimensional, hypothetical, groundwater models (MODFLOW-NWT) were developed to investigate the effects of a variety of factors on the flow of... -
Federal
SEAWAT, MODFLOW-2000, and SHARP models used to simulate future water-supply scenarios, Cape May County, New Jersey
Department of the Interior —
Three groundwater flow models, using MODFLOW-2000, SEAWAT, and SHARP model codes, were used to evaluate plans to supply potable and non-potable water to residents and... -
Federal
Simulated constant-head boundary for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents the constant head-boundary used to simulate ground-water inflow or outflow at the lateral boundary of the Death Valley regional... -
Federal
MODFLOW datasets for simulations of groundwater flow with downscaled global climate model data for the Suwannee River Basin, Florida
Department of the Interior —
A previously-developed groundwater model of the Suwannee River Basin was modified and calibrated to represent transient conditions. A simulation of recent conditions...