-
State
Field station locations and magnetic susceptibility data for the Yukon River Crossing Project, Alaska, collected June-July 2016
State of Alaska —
Field station locations and magnetic susceptibility data for the Yukon River Crossing Project, Alaska, collected June-July 2016, Raw Data File 2025-22, provides field... -
City
FEMA Flood Zones
City of Hartford —
According to FEMA the definition of a flood zone is a "geographic areas that FEMA has defined according to varying levels of flood risk and type of flooding. These... -
City
National Flood Hazard - Cross Sections
Louisville Metro Government —
Normally, any FIRM that has associated flood profiles has cross sections. The S_XS table contains information about cross section lines. These lines usually... -
City
National Flood Hazard - FIRM Panels
Louisville Metro Government —
The S_FIRM_Pan table contains information about the FIRM panel area. A spatial file with location information also corresponds with this data table. The spatial... -
State
Stream Crossings
Vermont Center for Geographic Information —
Physical measurements and attributes of stream crossing structures and adjacent stream reaches which are used to provide a relative rating of aquatic organism passage... -
State
Regional tsunami hazard assessment for Shemya, Alaska
State of Alaska —
We assess potential tsunami hazards for Eareckson Air Station on Shemya Island, Alaska. The primary tsunami hazard for this installation is considered to be near-... -
State
Single-beam bathymetric data near Tuntutuliak, Alaska, collected June 8, 2023
State of Alaska —
Single-beam bathymetric data near Tuntutuliak, Alaska, collected June 8, 2023, Raw Data File 2024-3, presents bathymetric data collected along the Kinak River near... -
State
Single-beam bathymetric data near Kongiganak, Alaska, collected June 6, 2023
State of Alaska —
Single-beam bathymetric data near Kongiganak, Alaska, collected June 6, 2023, Raw Data File 2024-4, presents bathymetric data collected along the Kongnignanohk River... -
State
Updated tsunami inundation maps for Seldovia, Alaska
State of Alaska —
Report of Investigation 2018-5A, Updated tsunami inundation maps for Seldovia, Alaska, updates the previous tsunami hazard assessment for Seldovia, Alaska, by... -
State
Statewide Levee
State of Oregon —
This is a dataset download, not a document. The Open button will start the download.The levee lines feature class is an inventory of levee lines representing the... -
State
DFIRM - Letter of Map Revision (LOMR)
Vermont Center for Geographic Information —
The entire Vermont extent of the National Flood Hazard Layer (NFHL) as acquired 12/15/15 from the FEMA Map Service Center msc.fema.gov upon publication 12/2/2015 and... -
State
Coastal Boundary
State of Connecticut —
The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of... -
County
2017 Digital Terrain Model - NE Corner
Lake County, Illinois —
Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the... -
State
Tsunami inundation maps of Port Valdez, Alaska
State of Alaska —
We evaluate potential tsunami hazards for the city of Valdez and numerically model the extent of inundation from tsunamis generated by earthquake and landslide... -
State
DFIRM Panels
Vermont Center for Geographic Information —
The entire Vermont extent of the National Flood Hazard Layer (NFHL) as acquired 12/15/15 from the FEMA Map Service Center msc.fema.gov upon publication 12/2/2015 and... -
State
Coastal hazard field investigations in response to the November 2011 Bering Sea storm, Norton Sound, Alaska
State of Alaska —
On November 8, 2011, an extra-tropical cyclone with a low pressure of 945 millibars developed over the Bering Sea and moved northeast across the western coast of... -
County
2017 Digital Terrain Model - SE Corner
Lake County, Illinois —
Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the... -
State
Coastal Boundary Polygon
State of Connecticut —
Coastal Area & Boundary Polygon: The Coastal Area layer is a 1:24,000-scale, polygon feature-based layer that includes the land and waters that lie within the...