-
Federal
The Urban Energy-Water Nexus: Utility-Level Water Flows and Embedded Energy
Department of Energy —
There are limited open source data available for determining water production/treatment and required energy for cities across the United States. This database... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications... -
Federal
Land of Opportunity: Geothermal, Land-based Wind, and Solar PV Potential on Federal Lands
Department of Energy —
This data packet contains supply curves and a composite siting exclusion TIFF for geothermal, land-based wind, and solar PV across the contiguous United States with... -
Federal
Utah FORGE 5-2557: Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes - 2025 Workshop Presentation
Department of Energy —
This is a presentation on the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced... -
Federal
Specified System Requirements for the HydroAir Power Take Off System
Department of Energy —
Includes Annual Energy Production of the system, Target Availability of the system, the system's PWR (power to weight ratio), Critical Dimensions and Weights (e.g.... -
Federal
Oscylator-4 Energy Converter St. Clair River Installation Data 2016
Department of Energy —
Data collected during the 2016 St. Clair River installation of the Oscylator-4 energy converter. -
Federal
Aquantis 2.5 MW Ocean Current Generation Device - Scaled Tank Test Design and Results
Department of Energy —
Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Rig Structural Analysis Results. This is the detailed documentation for scaled device testing in a... -
Federal
Closed Loop Pumped Storage Hydropower Resource Assessment of the United States
Department of Energy —
The data includes a geospatial and spreadsheet representation of a resource analysis for closed loop pumped storage systems across the Continental United States,... -
Federal
Simulating Complex Fracture Systems in Geothermal Reservoirs Using an Explicitly Coupled Hydro-Geomechanical Model
Department of Energy —
Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability... -
Federal
Utah FORGE 5-2557: Trixial Shear and Wellbore Breakout Tests Report and Data
Department of Energy —
Included are a report and data from triaxial shear tests on simulated Sierra White fault gouge and a borehole stimulation experiment. This serves as a progress report... -
Federal
Design Specifications for Manufacturer for the HydroAir Power Take Off System
Department of Energy —
Includes Design Specs for Manufacturer, PTO Weight, PTO Dimensions, Turbine (Rotor and Ductwork) Design, CAD Drawings of the turbine and rotor, List of components and... -
Federal
Translated System Requirements into PTO Design Requirements (in addition to Component-level metrics) for the HydroAir Power Take Off System
Department of Energy —
Includes Maximum Cost, Critical Dimensions and Weights, Damping Curve, Rotor Speed Profile Changes, Mechanical Power for a given pressure and airflow, Turbine rpm... -
Federal
Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS
Department of Energy —
The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems... -
Federal
Fallon FORGE: Distinct Element Reservoir Modeling
Department of Energy —
Archive containing input/output data for distinct element reservoir modeling for Fallon FORGE. Models created using 3DEC, InSite, and in-house Python algorithms... -
Federal
The Performance House: A Cold Climate Challenge Home - Old Greenwich
Department of Energy —
Working with builder partners on test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to... -
Federal
Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure
Department of Energy —
This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs... -
Federal
Modeling Responses of Naturally Fractured Geothermal Reservoir to Low-Pressure Stimulation
Department of Energy —
Hydraulic shearing is an appealing reservoir stimulation strategy for Enhanced Geothermal Systems. It is believed that hydro-shearing is likely to simulate a fracture... -
Federal
Snake River Plain FORGE: Site Characterization Data
Department of Energy —
The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory... -
Federal
An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Geothermal Behavior with Example Simulations on The Treasure Island and UC Berkeley Campus
Department of Energy —
This submission contains the source code of the Hydrothermal Finite Element Simulator used for the Treasure Island and UC Berkeley campus geothermal simulation. It... -
Federal
Dynamic Earth Energy Storage: Terawatt-year, Grid-scale Energy Storage Using Planet Earth as a Thermal Battery (GeoTES): Phase I Project Final Report
Department of Energy —
Final report for the DOE GTO funded research on geologic thermal energy storage (GeoTES), or commonly known as reservoir thermal energy storage (RTES). The results...