-
Federal
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations
Department of Energy —
Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk: FY1 Final... -
Federal
Walker Ranch 3D Seismic Images
Department of Energy —
Amplitude images (both vertical and depth slices) extracted from 3D seismic reflection survey over area of Walker Ranch area (adjacent to Raft River). Crossline... -
Federal
Design of an Airlift Bioreactor
Department of Energy —
An important consideration for the process design is cell immobilization-enabled flow-through operation. Large-scale biosorption relies on cells that are immobilized... -
Federal
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core
Department of Energy —
This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD... -
Federal
Brady Geothermal 1D Seismic Velocity Model
Department of Energy —
This submission contains an ASCII text file of seismic velocities derived from ambient noise cross-correlation used to create a model of seismic velocity as a 1-D... -
Federal
Illite Dissolution Rates and Equation (100 to 280 deg C)
Department of Energy —
The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and... -
Federal
Geomechanical Modeling for Thermal Spallation Drilling
Department of Energy —
Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling... -
Federal
Fully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications
Department of Energy —
The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in... -
Federal
The Value of Spatial Information for Determining Well Placement
Department of Energy —
The article and accompanying spreadsheet represent the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value... -
Federal
Gas Propagated Borehole Fracture Model And Simulation
Department of Energy —
We developed a model for fracture production produced during detonation of an explosive mixture in a 10m packed off section of a shallow borehole. The model is based... -
Federal
Utah FORGE 2-2446: Connecting In Situ Stress and Wellbore Deviation to Near-Well Fracture Complexity using Phase-Field Simulations
Department of Energy —
This report presents a series of numerical experiments investigating the relationships among near-well fracture complexity, in situ stress conditions, and wellbore... -
Federal
Simulating Complex Fracture Systems in Geothermal Reservoirs Using an Explicitly Coupled Hydro-Geomechanical Model
Department of Energy —
Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability...