-
Federal
Final Report: Low Temperature Geothermal Play Fairway Analysis for the Appalachian Basin
Department of Energy —
This is a final report summarizing a two-year (2014-16) DOE funded Geothermal Play Fairway Analysis of the Low-Temperature resources of the Appalachian Basin of New... -
Federal
Appalachian Basin Play Fairway Analysis: Natural Sedimentary Reservoirs Data 2016 Revision
Department of Energy —
Tier 3 data for Appalachian Basin sectors of New York, Pennsylvania and West Virginia used in a Geothermal Play Fairway Analysis of opportunities for low-temperature... -
Federal
Utah FORGE: Well 58-32 Core Analyses
Department of Energy —
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF... -
Federal
Analysis of downhole data from USU-1 well - Leidos Technical Report
Department of Energy —
USU Camas-1 is a geothermal test well drilled in Camas Prairie, Idaho, in the Summer and Fall of 2018. The purpose of this test well was to validate Play Fairway... -
Federal
TidGen MHK Generator Composite Fatigue Analysis Procedure
Department of Energy —
A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus... -
Federal
Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation
Department of Energy —
Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and... -
Federal
Walker Ranch 3D Seismic Images
Department of Energy —
Amplitude images (both vertical and depth slices) extracted from 3D seismic reflection survey over area of Walker Ranch area (adjacent to Raft River). Crossline... -
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models
Department of Energy —
This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team... -
Federal
Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design - Workshop Presentation
Department of Energy —
This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh... -
Federal
NWEI Azura RTI 1/20th Model Validation Wave Tank Test Data
Department of Energy —
Data from the 1/20th wave tank test of the RTI model. Northwest Energy Innovations (NWEI) has licensed intellectual property from RTI, and modified the PTO and... -
Federal
Alum Innovative Exploration Project (Ram Power Inc.)
Department of Energy —
Data generated from the Alum Innovative Exploration Project, one of several promising geothermal properties located in the middle to upper Miocene (~11-5 Ma, or... -
Federal
Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock
Department of Energy —
In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element... -
Federal
Utah FORGE: Well 58-32 Granite Core Thermal Properties Test Results Report (Oct. 2021)
Department of Energy —
This is a presentaiton from Metarock Laboratories on the thermal properties of Utah FORGE well 58-32 granite core. The presentation includes pictures of core samples,... -
Federal
EGS Collab: Modeling and Simulation Working Group Teleconference Series (99-128)
Department of Energy —
This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 99 through 128.... -
Federal
Utah FORGE: Earth Model Native State Simulation Results
Department of Energy —
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the... -
Federal
Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University
Department of Energy —
To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown... -
Federal
Triton-C Point Absorber Preliminary System Design Package
Department of Energy —
Preliminary System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface... -
Federal
Utah FORGE: Final Topical Report 2018
Department of Energy —
This is the final topical report for the Phase 2B Utah FORGE project, which is located near Roosevelt Hot Springs, Utah. This PDF format report details results... -
Federal
Utah FORGE: Laboratory Shear Experiments Linking Fault Roughness, Friction, Permeability, and P-Wave Characteristics
Department of Energy —
This dataset contains results from five laboratory shear experiments on gneiss and granitoid samples from the Utah FORGE site, conducted at Penn State University. The...