-
Federal
Utah FORGE: Geology Map and GIS Data
Department of Energy —
This archive contains a geology map of the general Roosevelt Hot Springs region, both in PDF and ArcGIS geodatabase formats, that was created as part of the Utah... -
Federal
Wave Measurements taken NW of Culebra Island, Puerto Rico, 2023
Department of Energy —
Wave and sea surface temperature measurements collected by a Sofar Spotter buoy in 2023. The buoy was deployed on July 27, 2023 at 11:30 UTC northwest of Culebra... -
Federal
Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation
Department of Energy —
Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and... -
Federal
Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Pressure and Circulation Data April, 2024
Department of Energy —
This dataset consists of all of the pressure pumping data for Utah FORGE Well16A78-32 fracturing stages, Well 16B78-32 fracturing stages, and a 9-hour circulation... -
Federal
Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours
Department of Energy —
This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the... -
Federal
Accelerated Lifetime Testing of Main Shaft Seals for Tidal Turbine Rotors
Department of Energy —
The lifetime assessment experimental platform described in this report is specifically designed for testing the low-speed main shaft seal for Verdant Power's (Verdant... -
Federal
Utah FORGE: Video of Utah FORGE Drilling Planning for Production Well 16B(78)-32
Department of Energy —
This is a YouTube video containing the specifics of well planning for Utah FORGE 16B(78)-32. This well will be drilled as a doublet approximately 300 feet parallel to... -
Federal
Utah FORGE 5-2565: Final Report on the Evolution of Permeability and Strength Recovery of Shear Fracture Under Hydrothermal Conditions
Department of Energy —
This report discusses the results of research on the ability to create and/or reactivate and subsequently sustain fracture systems which are strongly influenced by... -
Federal
Hawthorne Nevada Deep Direct-Use Feasibility Study - 3D Geologic Model
Department of Energy —
The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a... -
Federal
Aquantis 2.5 MW Ocean Current Generation Device - Scaled Tank Test Design and Results
Department of Energy —
Aquantis 2.5 MW Ocean Current Generation Device, Tow Tank Dynamic Rig Structural Analysis Results. This is the detailed documentation for scaled device testing in a... -
Federal
Holistic Control Embedded PTO Development - Target Performance Metrics Definitions
Department of Energy —
Collection of Power Take-Off (PTO), Power Conversion Chain (PCC), and relevant device metrics to be used for performance assessment of the Control co-designed PTO... -
Federal
Utah FORGE: Temperature Contours at 200 m
Department of Energy —
The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area.... -
Federal
University of Illinois Campus Deep Direct-Use Feasibility Study - Geology Log and Drilling Prospectus
Department of Energy —
Geology log and drilling prospectus for University of Illinois at Urbana-Champaign (UIUC) Energy Farm. -
Federal
Utah FORGE: Earth Model Native State Simulation Results
Department of Energy —
Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the... -
Federal
Utah FORGE: QuantumPro Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results - 2024
Department of Energy —
This dataset includes results and supporting documentation from tracer tests conducted in 2024 at Utah FORGE. The tests involved injecting nanoparticle tracers into... -
Federal
Utah FORGE: LBNL Reports on VEMP Electromagnetic Data Collection and Processing - 2024
Department of Energy —
This archive contains reports related to Vertical Electromagnetic Profiling (VEMP) tool data collection and processing at Utah FORGE in 2024. The first report... -
Federal
Utah FORGE: Phase 3A Year 1 Annual Report for 2020
Department of Energy —
This is the Utah FORGE annual report for Phase 3A year 1, which was completed on December 28th, 2020. This report includes site infrastructure, site operations,... -
Federal
Geothermal Geodatabase for Rico Hot Springs Area and Lemon Hot Springs, Dolores and San Miguel Counties, Colorado
Department of Energy —
This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be... -
Federal
Utah FORGE: Well 16B(78)-32 Post Hydraulic Fracturing 9 Hour Dual Well Circulation Test Fiber Optic Monitoring Report - April 2024
Department of Energy —
This report examines the fiber optic measurements made on the Utah FORGE well 16B(78)-32 after it and well 16A(78)-32 were hydraulically stimulated and shortly...