-
Federal
MODFLOW grid for simulations used to evaluate the potential effect of Lower Floridan aquifer groundwater pumpage on the Upper Floridan aquifer at Barbour Pointe community in Chatham County, Georgia
Department of the Interior —
A revised regional groundwater-flow model using a modified grid in conjunction with USGS MODFLOW-2000 was developed to the predict the effects of Lower Floridan... -
Federal
Discharge areas for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents discharge areas in the Death Valley regional ground-water flow system (DVRFS) transient model. Natural ground-water discharge occurs... -
Federal
Material-property zones used in the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Zones in this data set represent spatially contiguous areas that influence ground-water flow in the Death Valley regional ground-water flow system (DVRFS), an... -
Federal
Net infiltration of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Recharge in the Death Valley regional ground-water flow system (DVRFS) was estimated from net infiltration simulated by Hevesi and others (2003) using a deterministic... -
Federal
Lateral boundary of the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the lateral boundary and model domain of the area simulated by the transient ground-water flow model of the Death Valley regional... -
Federal
Lateral boundary of the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the lateral boundary and model domain of the area simulated by the transient ground-water flow model of the Death Valley regional... -
Federal
Altitudes of the top of model layers for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the altitudes of the tops of 16 model layers simulated in the Death Valley regional ground-water flow system (DVRFS) transient flow... -
Federal
Simulated constant-head boundary for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents the constant head-boundary used to simulate ground-water inflow or outflow at the lateral boundary of the Death Valley regional... -
Federal
Estimated Groundwater Withdrawals for the Coastal Carolinas Focus Area Study by MODFLOW Model-Cell Area, Year, and Water-Use Category, 1974 - 2015
Department of the Interior —
The coastal region which includes areas within the Pee Dee, Cape Fear, and Neuse-Pamlico River Basins in South Carolina and North Carolina was chosen as a focus area... -
Federal
MODFLOW-2000 model used to evaluate alternative withdrawal strategies on groundwater flow in the unconfined Kirkwood-Cohansey aquifer system, the Rio Grande water-bearing zone, and the Atlantic City 800-foot sand in the Great Egg Harbor and Mullica River Basins, New Jersey
Department of the Interior —
A three-dimensional groundwater-flow model (MODFLOW-2000 ) of the Kirkwood-Cohansey aquifer system, Rio Grande water-bearing zone, and Atlantic City 800-foot sand in... -
Federal
MODFLOW-2000 data sets used in two predictive scenarios of groundwater flow and pumping (1900-2050) near Mount Pleasant, South Carolina
Department of the Interior —
The U.S. Geological Survey in cooperation with Mount Pleasant Water Works updated an existing three-dimensional model (MODFLOW-2000) by Fine, Petkewich, and Campbell... -
Federal
Model grid and infiltration values for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the model grid and infiltration values simulated in the transient ground-water flow model of the Death Valley regional ground-water flow... -
Federal
Initial hydraulic heads for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the hydraulic-head values in 16 model layers used to initiate the transient simulation of the Death Valley regional ground-water flow... -
Federal
SEAWAT, MODFLOW-2000, and SHARP models used to simulate future water-supply scenarios, Cape May County, New Jersey
Department of the Interior —
Three groundwater flow models, using MODFLOW-2000, SEAWAT, and SHARP model codes, were used to evaluate plans to supply potable and non-potable water to residents and... -
Federal
Simulated potentiometric surface contours at end of simulation (1998) in model layer 16 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These contours represent the simulated potentiometric surface at the end of simulation (1998) in model layer 16 of the Death Valley regional ground-water flow system... -
Federal
MODFLOW-2000 and MODPATH4 used to simulate groundwater flow and contaminant transport in the Pohatcong Valley, Warren County, New Jersey
Department of the Interior —
The U. S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, developed a numerical ground-water-flow model, using MODFLOW-2000, to... -
Federal
Altitudes of the top of model layers for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the altitudes of the tops of 16 model layers simulated in the Death Valley regional ground-water flow system (DVRFS) transient flow... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 1 of the Death Valley regional ground-water flow... -
Federal
Simulated potentiometric surface contours at end of simulation (1998) in model layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These contours represent the simulated potentiometric surface at the end of simulation (1998) in model layer 1 of the Death Valley regional ground-water flow system... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 16 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 16 of the Death Valley regional ground-water flow...