-
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Hardware-in-the-loop Laboratory Performance Verification of Flexible Building Equipment in a Typical Commercial Building: Performance of Heating, Ventilation, and Air Conditioning and Thermal Energy Storage Across the United States
Department of Commerce —
This high-fidelity dataset measures the holistic load flexibility performance of a suite of commonly used commercial building heating, ventilating, and air-... -
Federal
n-Decylcyclohexane: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
GIAB Benchmarking of HG002 Assemblies from HPRC Year 1 Bakeoff
National Institute of Standards and Technology —
The Human Pangenome Reference Consortium (HPRC) tested which combination of current genome sequencing and automated assembly approaches yields the most complete,... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
Department of Commerce —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Data for figures in the AMTA 2023 conference paper titled "NIST Antenna Gain and Polarization Calibration Service Reinstatement"
Department of Commerce —
After a five-year renovation of the National Institute of Standards and Technology (NIST) Boulder, CO, antenna measurement facility, the Antenna On-Axis Gain and... -
Federal
Generator Fleet Characteristics Model
Department of Commerce —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
Department of Commerce —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
Department of Commerce —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Biphenyl: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Evaluation of static and dynamic magnetic properties of CoFeB versus thickness
National Institute of Standards and Technology —
The enclosed dataset includes measurements of a thickness series of CoFeB thin film samples that were deposited at the NIST Magnetic Engineering Research Facility... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
Department of Commerce —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Dark solitons in BECs dataset 2.0
Department of Commerce —
Atomic Bose-Einstein condensates (BECs) are widely investigated systems that exhibit quantum phenomena on a macroscopic scale. For example, they can be manipulated to...